Alternatives and similar repositories for PySpectrometer

Users that are interested in PySpectrometer are comparing it to the libraries listed below

• leswright1977 / PySpectrometer2
  The Second Incarnation of the Spectrometer project!
  ☆323Updated last year
• GaudiLabs / OpenLaserScanningMicroscope
  Open Source Laser Scanning Microscope
  ☆333Updated 5 years ago
• ozel / DIY_particle_detector
  A mobile low-cost spectrometer for measuring radioactivity and the energy of ionising radiation like alpha particles and electrons
  ☆522Updated 4 years ago
• benkrasnow / MultiSpectLED
  Array of 15 1W LEDs spanning 280nm to 940nm
  ☆105Updated 11 months ago
• spenceraxani / CosmicWatch-Desktop-Muon-Detector-v2
  The CosmicWatch Desktop Muon Detector supplementary material
  ☆298Updated 3 months ago
• OpenGammaProject / Open-Gamma-Detector
  ☢️👁️ Hardware for a hackable DIY gamma-ray spectrometer using a popular NaI(Tl) scintillator, SiPM and a Raspberry Pi Pico.
  ☆324Updated last month
• benkrasnow / Temperature_sensing_stirbar
  Schematics, PCB layout, and firmware for an RFID temperature sensor
  ☆158Updated 2 years ago
• kadirilkimen / Polar-Bear-Cnc-Machine
  A multipurpose, 2 linear, 1 rotary axis cnc machine concept
  ☆416Updated 3 years ago
• astrochart / CHART
  Completely Hackable Amateur Radio Telescope
  ☆118Updated last week
• Twisted-Fields / acorn-precision-farming-rover
  Source code for Acorn, the precision farming rover by Twisted Fields
  ☆268Updated last year
• UPennEoR / MiniRadioTelescope
  Arduino and python code for a mini-radio telescope.
  ☆365Updated 7 months ago
• tjltjl / plycutter
  ☆102Updated 3 years ago
• TadPath / PUMA
  3D Printed Microscope
  ☆738Updated 5 months ago
• adamb314 / ServoProject
  Getting the most out of your hobby servo
  ☆528Updated last year
• maxvfischer / DIY-CNC-machine
  How to build your own CNC machine from scratch
  ☆1,526Updated 3 years ago
• OpenAstroTech / OpenAstroTracker
  3D printed DSLR tracking mount
  ☆1,042Updated 9 months ago
• brickbots / PiFinder
  A plate solving telescope finder based around a Raspberry PI and RPI HQ Camera
  ☆218Updated 2 weeks ago
• OpenAstroTech / OpenAstroTracker-Firmware
  Official firmware for the OpenAstroTracker.
  ☆105Updated last month
• joaocarvalhoopen / Guides_Linux-Programming-Electronics-Aeronautics
  All my little guides in one place. Linux, Programming, Embedded, Electronics, Aeronautics and Guitar.
  ☆450Updated 3 years ago
• TUDSSL / BFree
  BFree: Enabling Battery-free Sensor Prototyping with Python
  ☆263Updated 2 years ago
• thethoughtemporium / sputteringsystem
  ☆145Updated 4 years ago
• Matchboxscope / Matchboxscope
  ESP32-based mini microscope for fluidic device observation
  ☆99Updated 2 years ago
• gjcroft / microscope
  ☆24Updated 3 years ago
• Hermann-SW / fork-raspiraw
  my raspiraw working fork for high framerate stuff (up to 750/1007 fps for v1/v2 camera)
  ☆92Updated 6 years ago
• sequoia-hope / rp2040-motor-controller
  A dual channel brushless motor controller based on the RP2040 microcontroller, designed in Kicad.
  ☆41Updated last year
• kingyoPiyo / Pico-10BASE-T
  10BASE-T from Raspberry Pi Pico
  ☆602Updated last year
• nortd / lasersaur
  Lasersaur -- open source laser cutter
  ☆389Updated 7 months ago
• Chr157i4n / PyTmcStepper
  This is a Python libary to drive a stepper motor with a Trinamic stepper driver and a single board computer like a Raspberry Pi
  ☆96Updated last week
• Neumi / ethersweep
  Open Source, easy to use Ethernet connected stepper motor controller. Built in FreeCAD, KiCAD and Arduino.
  ☆561Updated 7 months ago
• cariboulabs / cariboulite
  CaribouLite turns any 40-pin Raspberry-Pi into a Tx/Rx 6GHz SDR
  ☆1,273Updated 4 months ago