Alternatives and similar repositories for Hardware

Users that are interested in Hardware are comparing it to the libraries listed below

• DropletKitchen / pumpsn17
  Low-cost, High-performance Syringe Pumps for Microfluidics Applications
  ☆18Updated 8 years ago
• Opentrons / otone_hardware
  3D models and Bill of Materials for the opensource OT.One lab automation platform.
  ☆52Updated 7 years ago
• joshmaceachern / OSMMPump
  Open-Source Multichannel Microfluidics Pump. Developed as a research project to create a system that can precisely deliver fluids at a re…
  ☆12Updated 3 years ago
• Opentrons / ot2
  Open source hardware documentation for the OT-2 liquid handling robot
  ☆63Updated 4 years ago
• traulab / DIYNAFLUOR
  Code, 3D Print Files, BOM and Build Instructions for the DIYNAFLUOR DNA Fluorometer
  ☆26Updated 3 months ago
• GaudiLabs / PocketPCR
  Pocket size USB powered PCR Thermo Cycler
  ☆152Updated 4 years ago
• beniroquai / Opentrons-Microscope-Platereader
  ☆18Updated 4 years ago
• dnhkng / Polymerase-Chain-Reactor
  Open Source PCR machine for DIY Recombinant Genetics
  ☆16Updated 9 years ago
• chaibio / chaipcr
  The software behind Chai's open-source Real-Time PCR instrument
  ☆91Updated 5 months ago
• Vsaggiomo / Ender3-syringe-pumps
  Transforming a 3D printer (Ender 3) kit to a set of syringe pumps
  ☆27Updated last year
• Biomaker / 2018-opensourcebioreactor
  Open Source Bioreactor (Biomaker Challenge 2018)
  ☆53Updated 6 years ago
• sci-bots / microdrop
  Microdrop is a graphical user interface for an automated Digital Microfluidics control system.
  ☆25Updated 3 years ago
• GaudiLabs / 3DFiberSpectrometer
  Fully 3D printed fibre spectrometer. The spectrometer is a scientific instrument used to separate and measure components of light. The op…
  ☆23Updated 4 months ago
• Binomica-Labs / Publications
  Content we create, publish, and share involving amateur science and biological research
  ☆32Updated 4 years ago
• Hackuarium / simple-spectro
  Very cheap, autonomous and precise spectrophotometer for DIY biology and chemistry.
  ☆45Updated 10 months ago
• Matchboxscope / Matchboxscope
  ESP32-based mini microscope for fluidic device observation
  ☆93Updated last year
• MakerTobey / OpenMicrofluidics
  Review, test and development of open source hardware approaches to microfluidic research equipment and ultra-high throughput bio-experime…
  ☆39Updated 9 months ago
• Biological-Microsystems-Laboratory / micropipette
  3D Printable Micropipette
  ☆41Updated 7 years ago
• oyep / oyep
  Open Yeast Engineering Project
  ☆18Updated 7 years ago
• CubeFactory2 / cubefactory
  instructions on the CubeFactory 2
  ☆10Updated 5 years ago
• HackyDev / vibrotactile-stimulator
  This DIY device is for vibrotactile stimulation and consists of 8 vibration modules and a NodeMCU controller. The frequency, vibration du…
  ☆14Updated 2 years ago
• RinthLabs / PCBWrench
  Open Hardware Wrench made from PCBs
  ☆17Updated 3 years ago
• mayermakes / Engineering-Resin
  MAYER MAKES Engineering Resin, Material Safety datasheets, technical information and Slicer settings
  ☆11Updated 9 months ago
• lynaghk / calipertron
  ☆23Updated 7 months ago
• PaulKlinger / mrna_vaccine_badge
  A small badge showing a schematic of an mRNA vaccine nanoparticle and blinking the RNA sequence of the Moderna or Pfizer vaccines.
  ☆42Updated 3 years ago
• fab-machines / Fabulaser-Mini
  An open source laser cutter within your reach.
  ☆36Updated last year
• SynBioDex / SBOLDesigner
  SBOL Designer Project
  ☆32Updated 4 years ago
• iforce2d / weenyPRU
  LinuxCNC component and firmware for Raspberry Pi to communicate with a STM32 microcontroller.
  ☆64Updated 2 months ago
• brianchowlab / OSP
  An Open-source Plate Reader
  ☆28Updated 5 years ago
• 0x23 / CableRobot3DPrinter
  A fast parallel kinematic 3D printer using cables and winches as actuator.
  ☆23Updated last year