leswright1977 / avalanche-laser-diode-driverLinks
Files for an avalanche Laser diode driver
☆23Updated last year
Alternatives and similar repositories for avalanche-laser-diode-driver
Users that are interested in avalanche-laser-diode-driver are comparing it to the libraries listed below
Sorting:
- 3D printed laser scanning microscope from CD/DVD/Blu-ray pickup☆93Updated 7 months ago
- An Open Source Interferometer for Accurate Distance Measurements☆89Updated 4 months ago
- Zyrus STM Tip Etching Machine☆24Updated 2 years ago
- Multi instrument datalogging platform☆88Updated last week
- Array of 15 1W LEDs spanning 280nm to 940nm☆105Updated last year
- ☢️👁️ Hardware for a hackable DIY gamma-ray spectrometer using a popular NaI(Tl) scintillator, SiPM and a Raspberry Pi Pico.☆328Updated 2 weeks ago
- Low-noise oscilloscope power rail probe☆88Updated 4 months ago
- 🎒 Carrier board for a 6 mm C-Series MicroFC-60035 silicon photomultiplier.☆20Updated 2 weeks ago
- Maasi is an Open Source Spin Coater☆53Updated last year
- Energy efficient constant current diode laser driver☆49Updated 7 years ago
- 2GHz single-ended active probe design☆165Updated last year
- Experiments with ESPROS epc901 1024x1 CCD line sensor, including a spectroscope.☆56Updated 2 years ago
- ☆144Updated 4 years ago
- Enhance resolution by capturing many images with off-axis illumination and combining in Fourier space. Adapted from https://github.com/W…☆92Updated 10 months ago
- Low cost 10V transfer standard☆18Updated 3 years ago
- A simple and low cost particle detector for teaching☆80Updated last year
- A 0.01Hz-1+MHz low noise amplifier☆31Updated last year
- Simple breakout board for ISC0901B0 sensor☆15Updated 3 years ago
- ☆50Updated 2 years ago
- ☆76Updated 9 months ago
- USB-C powered LED fixture that fits on top of a microscope objective☆14Updated last year
- Solver32 is a 32-bit application for the LiteVNA as well as the V2Plus4. It was developed using National Instruments LabView 2011.☆15Updated 2 years ago
- Rotary Crystallizer☆24Updated last year
- Based on Radioberry designd by" https://github.com/pa3gsb/Radioberry-2.x"☆72Updated 2 years ago
- A tiny 1.3 GHz FET Probe☆34Updated 3 years ago
- ADR1000 10V standard☆134Updated 7 months ago
- A simple cost-effective demo, test, training, board for an oscilloscope made from a Raspberry Pi Pico☆60Updated last year
- ☆101Updated 3 weeks ago
- An open source software suite to control the ADF4351 board☆69Updated 4 years ago
- ☆43Updated last year