Alternatives and similar repositories for usb-can

Users that are interested in usb-can are comparing it to the libraries listed below

• marcinbor85 / can-prog
  Command-line tool to flashing devices by CAN-BUS
  ☆87Updated 5 years ago
• alexmohr / usb-can
  USB-CAN Analyzer Linux Support
  ☆42Updated 2 months ago
• SeeedDocument / USB-CAN-Analyzer
  ☆119Updated last year
• jgeisler0303 / CANFestivino
  Arduino Library Version of CANFestival CANopen Stack
  ☆57Updated 10 years ago
• jgressmann / supercan
  This is project SuperCAN. An open source USB to CAN-FD protocol.
  ☆89Updated 2 months ago
• walmis / stm32-slcan
  slCAN compatible firmware for STM32f103C8T6
  ☆75Updated 3 years ago
• TheRo0T / CAN-USB-STM32
  ☆67Updated 9 years ago
• mpcrowe / canopen-raspberrypi
  a CanOpen Raspberry Pi Project that integrates several other projects
  ☆32Updated 6 years ago
• roboterclubaachen / usb2can
  ☆52Updated 5 years ago
• madprogrammer / stm32-can-bootloader
  STM32 CAN-bus bootloader
  ☆78Updated 8 years ago
• RudolphRiedel / USB_CAN-FD
  This is an Open Source Hardware USB to CAN-FD Interface
  ☆73Updated 7 months ago
• pierremolinaro / acan2517FD
  Distribution of Arduino driver for MCP2517FD CAN controller (CANFD mode)
  ☆77Updated 2 months ago
• mintynet / esp32-slcan
  ESP32 slcan compatible device
  ☆101Updated 4 years ago
• INNO-MAKER / usb2can
  ☆115Updated 2 months ago
• GBert / misc
  miscellaneous stuff / unsorted
  ☆99Updated 9 months ago
• jgeisler0303 / AGCON
  Arduino Generic CAN Open Node
  ☆25Updated 8 years ago
• fabiobaltieri / open-usb-can
  Open Source USB to CANBUS interface
  ☆109Updated last year
• nopnop2002 / esp-idf-can2http
  CANbus to http bridge using esp32
  ☆45Updated 3 months ago
• ryedwards / budgetcan-fw
  Firmware to support gs_usb on most STM32 devices
  ☆49Updated last month
• exothink / eXoCAN
  stm32duino CAN Library for the STM32F103 aka Blue Pill
  ☆84Updated last year
• kurt-vd / test-can-j1939
  Readme + howto for can-j1939
  ☆41Updated 7 years ago
• macchina / LIN
  Arduino library to add dual LIN support on SAM3X based boards with a TJA1021/TJA1027 transceiver
  ☆117Updated 6 years ago
• cvra / can-bootloader
  The bootloader used to flash our CAN-connected boards
  ☆147Updated 2 years ago
• PhilippFux / ESP32_CAN_Interface
  CAN_Interface for ESP32 (Cannelloni Protocol)
  ☆58Updated 4 years ago
• SimonCahill / isotp-c
  An implementation of the ISO-TP (ISO15765-2) CAN protocol in C
  ☆39Updated last month
• Alphatronics / mbed-os-example-canopen
  An example program runnig CANopenNode running on NUCLEO_F091RC mbed platform
  ☆25Updated 4 years ago
• normaldotcom / candleLight_fw
  gs_usb compatible firmware for candleLight, cantact and canable
  ☆79Updated 4 years ago
• kahiroka / slcanuino
  USB-CAN(SocketCAN) sketch for Arduino CAN-BUS shield
  ☆138Updated 3 years ago
• altelch / iso-tp
  ISO 15765-2 TP implementation for Arduino
  ☆89Updated 4 months ago
• tuna-f1sh / entree
  Entree is a USB-C CAN interface with USB-PD - gets the CAN party started!
  ☆82Updated last year