jkarolus / UltraSenseLinks
Tools to apply Ultrasound sensing using an Android smartphone.
☆18Updated 10 years ago
Alternatives and similar repositories for UltraSense
Users that are interested in UltraSense are comparing it to the libraries listed below
Sorting:
- ☆41Updated 8 years ago
- Firmware repository for the WISP 5.0☆66Updated 3 years ago
- Gen2 UHF RFID reader with USRP and GNU Radio. Tested with USRPN200 and GNU Radio v3.7.4☆248Updated 8 months ago
- Lib acoustic sensing is a utility library easing the process to design apps based on acoustic information☆67Updated 7 years ago
- This is a MATLAB SDR implementation of a LoRa receiver: demodulation and decoding☆28Updated 8 years ago
- Tagbeat - Sensing Vibration through Backscatter Signals!☆17Updated 8 years ago
- A tutorial OOT module for GNU Radio☆118Updated 5 years ago
- acoustic sensing platform☆13Updated 2 years ago
- LoRa Modulation and Coding Scheme Simulator on Matlab☆46Updated 4 years ago
- Reception of GPS signals from RTL-SDR and getting raw GPS data☆18Updated 9 years ago
- Symbol to Bit Mapping and Demapping Blocks for GNU Radio☆35Updated 5 years ago
- Using PlutoSDR to transfer text message.☆16Updated 5 years ago
- An Open Source Software Package that enables owners of DVB-T dongles with an embedded Realtek RTL2832U chipset to build models in Simulin…☆42Updated 12 years ago
- OFDM implementation for GNURadio using UHD☆12Updated 14 years ago
- A module adding spectral estimation routines to GNU Radio.☆60Updated 5 years ago
- ☆46Updated 5 years ago
- ☆17Updated 8 years ago
- WiPiCap: Dig into Wi-Fi Beamforming Report☆48Updated 3 months ago
- LoRa physical layer collision decoding based on GNU Radio☆78Updated 2 years ago
- Example project for extracting channel state information of up to 80 MHz wide 802.11ac Wi-Fi transmissions using the BCM4339 Wi-Fi chip o…☆106Updated 6 years ago
- 802.11a PHY Layer Implementation for USRP☆48Updated 3 years ago
- FPGA code and Python API for adding chirp functionality to USRP N210 with CBX daughter board, after the required hardware modification.☆36Updated 2 years ago
- YunSDR Open Source Project☆13Updated 8 years ago
- 802.11n CSI Tool based on iwlwifi and Linux-2.6☆215Updated 5 years ago
- Making RFID research enjoyable!☆41Updated 8 years ago
- A simple, low-power, low-cost 5.8-6.0 GHz microwave FMCW radar☆113Updated 11 years ago
- EPC C1G2 reader for the USRPv1☆27Updated 11 years ago
- Using Software Designed Radio to transmit LTE downlink signals at 2.4 GHz☆45Updated 6 years ago
- Out-of-tree module for GNU Radio containing a complete OFDM implementation including GUI for reasearch and teaching☆75Updated 4 years ago
- Tutorial for creating new OOT modules for GNU Radio that leverage pyCUDA.☆24Updated 2 years ago