nos86 / micropythonLinks
MicroPython - a lean and efficient Python implementation for microcontrollers and constrained systems
☆16Updated 5 years ago
Alternatives and similar repositories for micropython
Users that are interested in micropython are comparing it to the libraries listed below
Sorting:
- Universal Pycom firmware for ESP32 boards☆11Updated 3 years ago
- ☆49Updated 5 years ago
- ESP32 slcan compatible device☆101Updated 3 years ago
- BUSMASTER is an Open Source Software tool to simulate, analyze and test data bus systems such as CAN. BUSMASTER was conceptualized, desig…☆39Updated 4 years ago
- LIN(Local interconnect network) to USB converter with LIN master support compatible with SLCAN.☆79Updated 2 years ago
- ☆30Updated 8 months ago
- CANbus to http bridge using esp32☆44Updated 9 months ago
- CANbus to USB bridge using esp32☆30Updated last month
- Open source project that uses the CANable hardware from protofusion.org☆38Updated 5 years ago
- Xvaser LL v2 firmware for CANtact ( CANable ) or any other similar boards.☆46Updated 3 years ago
- SWD driver for ESP32(-S2/S3)☆20Updated 4 months ago
- Hardware design files for the CANtact Pro☆73Updated 4 years ago
- Firmware for SM-1301 USB-CAN FD adapter☆26Updated last week
- ☆65Updated 9 years ago
- Arduino STM32. Hardware files to support STM32 boards, on Arduino IDE 1.6.5 including LeafLabs Maple and other generic STM32F103 boards. …☆10Updated 3 years ago
- Monitor Canbus traffic☆127Updated last month
- Arduino Library Version of CANFestival CANopen Stack☆56Updated 9 years ago
- STM32 CAN-bus bootloader☆76Updated 8 years ago
- ☆92Updated 7 years ago
- Implementation of Local interconnect network in c☆75Updated last month
- gs_usb compatible firmware for candleLight, cantact and canable☆71Updated 3 years ago
- Yet another USB-CAN adapter.☆12Updated 3 years ago
- ☆27Updated 6 years ago
- slcan firmware for the CVRA CAN to USB dongle☆37Updated 4 years ago
- Arduino library to add dual LIN support on SAM3X based boards with a TJA1021/TJA1027 transceiver☆113Updated 6 years ago
- ☆18Updated 2 years ago
- CAN to USB adapter using Lawicel/Canhacker protocol.☆22Updated 6 years ago
- a CanOpen Raspberry Pi Project that integrates several other projects☆32Updated 5 years ago
- CAN-BUS TO USB-UART(STM32F042)☆23Updated 9 years ago
- Programmers for Attiny and STM32 MCU☆42Updated 6 years ago