Alternatives and similar repositories for buildJetsonModules:

Users that are interested in buildJetsonModules are comparing it to the libraries listed below

• leahneukirchen / linux-jetson-tk1
  Linux kernel source tree for Jetson TK1, non stable reference
  ☆16Updated 10 years ago
• christianjann / L4T_PREEMPT_RT
  PREEMPT_RT kernel for the Jetson TK1.
  ☆17Updated 9 years ago
• lgeek / jetson_hw_hacking
  Jetson TK1 hardware hacking
  ☆19Updated 10 years ago
• jetsonhacks / jetsonGPIO
  A straightforward library to interface with the Jetson TK1 GPIO pins
  ☆21Updated 9 years ago
• jetsonhacks / installROSTK1
  Install Robot Operating System (ROS) on NVIDIA Jetson TK1
  ☆21Updated 5 years ago
• smukkejohan / RTIMULib
  RTIMULib makes it easy to use 9-dof IMUs with embedded Linux systems (especially the Raspberry PI!)
  ☆48Updated 4 years ago
• TKJElectronics / XV11Lidar_STM32F429
  Neato XV-11 LIDAR connected to an STM32F429IDISCOVERY board for 360-degree range scanning and measurement
  ☆41Updated 10 years ago
• BeaglePilot / beaglepilot
  An autopilot for Linux-based computers based on the BeagleBone (Black)
  ☆110Updated 8 years ago
• tridge / cuav
  CanberraUAV OBC code
  ☆39Updated last year
• NorthStarUAS / rc-flight-legacy
  Hybrid Python/C++ flight control, flight data, and autopilot system.
  ☆16Updated 8 months ago
• husarion / hFramework
  hFramework is a library for creating real-time software for robotic & mechatronic devices
  ☆28Updated 5 years ago
• turtlebot / turtlebot2e
  ☆17Updated 8 years ago
• xioTechnologies / x-IMU-GUI
  ☆33Updated 11 years ago
• Zubax / gridsens_gs2
  Zubax GNSS module
  ☆55Updated 7 months ago
• radxa / rabian-build
  Build scripts for Rabian
  ☆12Updated 3 years ago
• pixhawk / Pixhawk-Mechanical-Interfaces
  ☆15Updated 2 years ago
• bitcraze / crazyflie2-nrf-bootloader
  Crazyflie 2.0 nRF51 Bootloader
  ☆11Updated 5 months ago
• PX4 / libuavcan
  UAVCAN is a lightweight protocol designed for reliable communication in aerospace and robotic applications via CAN bus.
  ☆12Updated 5 months ago
• dganbold / raspicam_node
  ROS node for mipi camera module of Raspberry Pi
  ☆23Updated last year
• PX4 / HIL
  Hardware in the loop tools for PX4 Firmware
  ☆39Updated 5 years ago
• semuconsulting / Gamepad_PS4BT
  Arduino library for using PS3/PS4 controller with Hobbytronics USB host adapter & Bluetooth dongle in I2C mode
  ☆9Updated 5 years ago
• Zubax / opengrab_epm_v3
  OpenGrab Electropermanent Magnet
  ☆33Updated last year
• sparkfun / IOIO-OTG
  Development Board for Android
  ☆24Updated 8 years ago
• bitcraze / crazyflie-bootloader
  The Crazyflie bootloader used for flashing firmware via the radio.
  ☆31Updated 3 years ago
• mindbeast / rpi-mpu6050
  Simple C code for raspberry pi to read gyro, accelerometer, and temperature data from a mpu-6050 sensor.
  ☆9Updated 10 years ago
• openmv / openmv-swd
  Serial Wire Debugger Programmer
  ☆10Updated last year
• MatrixPilot / MatrixPilot
  An OpenSource Autopilot
  ☆122Updated last year
• EspressifApp / EsptouchForIOSForRTOS
  Esptouch for IOS developer, it is used by RTOS version
  ☆11Updated 5 years ago
• gbmhunter / MPid
  A light-weight, fast PID library designed for use on embedded systems (but can also run on any machine which has a G++ compiler).
  ☆19Updated 5 years ago
• ElektorLabs / 180516-Elektor_LoRa_Node
  Files for the Elektor LoRaWAN Node Experimental Platform
  ☆11Updated 2 years ago