Alternatives and similar repositories for JevonsCameraViewer

Users that are interested in JevonsCameraViewer are comparing it to the libraries listed below

• PedroLopes / openEMSstim
  openEMSstim: open-hardware module to adjust the intensity of EMS/TENS stimulators.
  ☆163Updated 4 years ago
• HiveTracker / HiveTracker.github.io
  Organization Page
  ☆150Updated 3 years ago
• mariolukas / FabScanPi-Server
  FabScan Pi Open Source 3D Scanner - Server application
  ☆199Updated last year
• pupil-labs / pupil-geometry
  Pupil Hardware Interface Camera Mounts
  ☆17Updated 6 years ago
• fmaurer / FreePIE-VR-Controls
  ☆99Updated 9 years ago
• alvaroferran / MotioSuit
  Active motion capture suit which reads data from IMUs in real time and sends them to Blender over Bluetooth. Low cost and open-source
  ☆122Updated 9 years ago
• Open360cam / 360CamHardware
  The Open 360 Camera Project hardware info including BOM, drawings, pricing
  ☆47Updated 9 years ago
• OpenElectronicsLab / OpenHardwareExG
  The OpenHardwareExG is a platform for ECG, EEG, EMG, ENG, EOG, and evoked potential applications. http://openelectronicslab.github.io/Op…
  ☆96Updated 4 years ago
• ivmech / ivport
  Raspberry Pi Camera Module Multiplexer
  ☆79Updated 6 years ago
• pupil-labs / hmd-eyes
  Building blocks for eye tracking in AR and VR.
  ☆156Updated 3 years ago
• neofuturism / cheApR
  cheApR, the DIY Augmented Reality goggles
  ☆104Updated 4 years ago
• OpenSAMOfficial / OpenSAM
  OpenSAM by OHM - 3D Printed Camera Stabilizer
  ☆63Updated 8 years ago
• eyewriter / eyewriter
  open source eye tracking and drawing toolkit
  ☆194Updated 11 years ago
• pdaderko / lighthouse_sensor
  Lighthouse Sensor for HTC Vive
  ☆41Updated 9 years ago
• jevois / jevois
  JeVois smart machine vision framework
  ☆157Updated 10 months ago
• OpenBCI / Ganglion_Hardware_Design_Files
  General repo for Ganglion hardware files
  ☆80Updated 2 years ago
• frank26080115 / HandHeld3DScanner
  ☆120Updated 2 years ago
• swharden / diyECG-1opAmp
  A surprisingly good ECG circuit using a single op-amp and some Python software
  ☆108Updated 4 years ago
• HiveTracker / firmware
  nRF52 code: handles LightHouse pulse signals measured with TS4231 + IMU
  ☆59Updated 5 years ago
• devinbarry / GazeTracker
  ITU Gaze Tracker - Gaze Tracking Library
  ☆48Updated 11 years ago
• Myrijam / Venenfinder
  Assistive medical device to help localizing veins for intravenous access...
  ☆20Updated 6 years ago
• herzig / bewegungsfelder
  Inertial Motion Capture for everyone
  ☆105Updated 3 years ago
• MGX3D / Turntable
  DIY heavy duty and high precision turntable for 3D Scanning
  ☆43Updated 7 years ago
• OperationSmallKat / SmallKat_V2
  ☆34Updated 8 months ago
• Sardau / Sardauscan
  Under 30$ open source 3d Scanner
  ☆241Updated 4 years ago
• Protocentral / protocentral_max86150_ecg_ppg
  ProtoCentral MAX86150 PPG and ECG chip breakout board Arduino libraries and Hardware
  ☆39Updated 8 months ago
• leapmotion / leapuvc
  Examples in Python, Matlab, and C for interpreting data from UVC-Enabled Leap Motion Peripherals
  ☆118Updated last year
• Kurokesu / motorized_zoom_lens
  Software for open-source motorized CS zoom lens controller
  ☆28Updated 6 years ago
• gatlee21 / TritonProject
  Official Triton Guide:
  ☆42Updated 5 years ago
• FIGLAB / vibrosight
  Vibrosight open-source project
  ☆36Updated 6 years ago