Alternatives and similar repositories for ev-obd-pids

Users that are interested in ev-obd-pids are comparing it to the libraries listed below

• damienmaguire / VW-OnBoard-Charger
  Hacking and reverse engineering of the VW Onboard AC chargers
  ☆15Updated 2 years ago
• damienmaguire / BMW_SBox
  Reverse Engineering of the BMW SBox for use in ev conversion projects
  ☆12Updated 2 years ago
• MyLab-odyssey / ED_BMSdiag
  Retrieve battery diagnostic data from your smart electric drive EV.
  ☆57Updated 3 years ago
• morcibacsi / PSASteeringWheelAdapter
  ESP32 based steering wheel adapter for Peugeot and Citroen cars
  ☆36Updated 5 years ago
• pavelmalik / BMWCanBridge
  Arduino Due solution for adding vin-coded modules to BMW cars
  ☆62Updated 6 years ago
• uhi22 / wifican
  Bridge between Wifi and CAN. Minimal variant of the ESP32RET. Using ESP32s3
  ☆34Updated last year
• rnd-ash / ultimate_nag52
  An open source TCM for Daimlers 722.6 gearbox. Resource repository
  ☆118Updated last year
• smartgauges / canbox
  Firmware for canbus boxes
  ☆106Updated 2 months ago
• Tom-evnut / VW-bms
  Can based decoding of VW bms data
  ☆37Updated last year
• HeinrichG-V12 / E65_ReverseEngineering
  ☆44Updated 3 years ago
• zapta / linbus
  An Arduino based LINBUS stack and signal interceptor/injector.
  ☆195Updated 6 years ago
• Cellgalvano / ESP32_CANViewer
  A ESP32 based CAN interface for your webbrowser
  ☆27Updated 4 years ago
• nopnop2002 / Arduino-CANBus-Monitor
  mcp2515 canbus module to Monitor Canbus traffic
  ☆41Updated last year
• SystemsCyber / CAN-Logger-3
  Source code and documentation for the CAN Logger 3, a project sponsored by the National Science Foundation (NSF) and National Motor Freig…
  ☆21Updated last year
• bri3d / esp32-isotp-ble-bridge
  ESP32-IDF based BLE<->ISO-TP bridge targeting Macchina A0 hardware
  ☆39Updated 2 years ago
• autowp / CANreader
  Android CAN client
  ☆63Updated 8 years ago
• damienmaguire / BMW-i3-CCS
  Reverse engineering of the BMW i3 LIM (charge control) module for purposes of opensource CCS fast charging
  ☆48Updated last year
• uhi22 / foccci
  Fully Open CCS Charge Controller Interface with QCA7005 PLC modem
  ☆87Updated 4 months ago
• tomaskovacik / VAGFISReader
  arduino library to read data on V.A.G. FIS line (3lb, data,enable,clock)
  ☆10Updated 4 years ago
• dalathegreat / EV-CANlogs
  Collection of CAN logs from different electric vehicles
  ☆37Updated last week
• damienmaguire / Nissan-Leaf-Inverter-Controller
  OpenSource Control Unit for the Nissan Leaf Gen 1 and Gen 2 inverter
  ☆61Updated 4 years ago
• omarKmekkawy / Arduino_CANHacker
  This repo for using your Arduino with MCP2515 CAN Interface and CANHacker software
  ☆55Updated 4 years ago
• jamiejones85 / ESP32-BMS
  An ESP32 based BMS master for CAN based remote boards. Makes use of SimpBMS code for decoding the module data messages.
  ☆16Updated 2 years ago
• mintynet / esp32-slcan
  ESP32 slcan compatible device
  ☆101Updated 4 years ago
• laurynas / volvo_linbus
  Volvo LIN bus reader
  ☆97Updated 4 years ago
• dalathegreat / Nissan-LEAF-Inverter-Upgrade
  Software for extracting more power from LEAF inverter upgrades. Enables 110kW and 160kW inverters to function with the older LEAF
  ☆76Updated 8 months ago
• smartgauges / obd2-bt-stm32
  Firmware for the cheapest can sniffer
  ☆38Updated last year
• JacekGreniger / stm32-vagcanlogger
  VAGCANLOGGER - KW1281 & VW TP 2.0
  ☆33Updated 11 years ago
• LuukEsselbrugge / Volve
  Volvo CAN BUS extender based on ESP32
  ☆102Updated 4 years ago
• kmalinich / dieslg8
  Arduino Uno + Seeed Studio CANBUS + BMW M57 diesel
  ☆46Updated 4 years ago