iansbremner / ReAmiga-3000---KiCAD
ReAmiga 3000TH by John 'Chucky' Hertell converted to KiCAD
☆19Updated 4 years ago
Alternatives and similar repositories for ReAmiga-3000---KiCAD:
Users that are interested in ReAmiga-3000---KiCAD are comparing it to the libraries listed below
- Schemtics and PCB Layout for the Amiga 2000 Rev6☆11Updated 3 years ago
- Here is a Picasso 4MB Flicker Fixed for Amiga 2000, 3000 and 4000☆14Updated last year
- Amiga 500 8MB FastRAM and IDE interface☆32Updated 5 months ago
- ☆25Updated 2 years ago
- Changes the orientation of a 68000 DIP CPU☆15Updated 5 years ago
- The reverse engineered schematics for the Action Replay II/III for the Amiga. The eventual end goal of this project is to reimplement the…☆13Updated last year
- Adapter to allow the use of the A500+/A600 Agnus (390544 8375 ) in an Amiga A3000☆17Updated 2 years ago
- Replace the old 44256 DRAM chips on your A500 with newer SRAM memory☆3Updated 5 years ago
- A knockoff of the A1050 front mounted RAM Expansion for the Amiga 1000☆12Updated 10 months ago
- 68000 Relocator with FLASH Kickstart☆31Updated 2 years ago
- A simple interface for standard PC Floppy Disk Drive and Amiga Computers☆26Updated 2 years ago
- single 12V Power supply module for Amiga 500 computers☆28Updated 3 years ago
- A PLCC-84 plug adapter created out of PCBs☆24Updated 4 months ago
- A replica of the Prelude ZII sound card for the Amiga.☆34Updated last year
- Amiga 600 Accelerator And RAM Expansion☆28Updated 3 years ago
- Amiga 500+ v8a Re-Imagined.☆11Updated 5 years ago
- ☆20Updated 2 weeks ago
- This is a Kernal Adapter/Switch for the Commodore C64, ASSY250469 (short board).☆30Updated 2 years ago
- PCMCIA SRAM card project (Sakura) - rev 2.1.2019☆11Updated 5 years ago
- Spitfire 2000, A low-end 42 MHz Accelerator with IDE and 4/8 MB fast RAM for the Amiga 2000 co-pro slot (or A500 through an adapter).☆22Updated this week
- 8MB FastRAM and BSC-AT-Bus IDE controller for Amiga 500☆24Updated 5 months ago
- Adapter to fit the older 1MB Agnus to the A500+☆16Updated 3 years ago
- 8MB autoconfig fast memory for the Amiga 2000☆27Updated last year
- A LAN/IDE solluntion with Clockport for the Amiga ZorroII/III Slot☆16Updated 5 years ago
- A remake of the RA5-512K expansion memory for the Amiga 500 made in diptrace☆17Updated 5 years ago
- 65(c)02 to 7501/8501 converter☆18Updated 2 years ago
- Amiga 500 Side Expansion Slot CPU Relocator with Flash Kickstart☆11Updated 3 years ago
- ☆10Updated 2 years ago
- Fancy Kickstart Switcher for A500-A600-A1200-A4000☆18Updated 3 months ago
- A PSU for the Commodore C64 and up to two 1541-II floppy disk drives☆24Updated last year