Alternatives and similar repositories for openOBD

Users that are interested in openOBD are comparing it to the libraries listed below

• sparkfun / OBD-II_UART
  A board that provides a serial interface with a vehicle's OBD-II bus.
  ☆83Updated 5 years ago
• carloop / hardware
  OBD-II CAN adapter for Particle Electron, Photon, and RedBear Duo
  ☆106Updated 6 years ago
• kkuchera / canalyze-hw
  Hardware for a CAN to USB bridge.
  ☆58Updated 7 years ago
• autosportlabs / OBD2CAN
  Provides a bridge between any OBD2 compliant vehicle and the CAN bus interface.
  ☆43Updated 5 years ago
• nabilt / Bluetooth-ODB-2-Adapter
  Bluetooth ODB-2 Adapter based on the STN1110
  ☆43Updated 8 years ago
• RJSzynal / ScanTool.net
  ScanTool.net OBD-II Software for ElmScan is free software that allows you to use your computer and an inexpensive hardware interface to r…
  ☆22Updated 3 months ago
• sparkfun / CAN-Bus_Shield
  ☆83Updated last year
• festlv / canbus_logger
  CANBus logger using Arduino + MCP2515 with GUI in Python
  ☆24Updated 12 years ago
• kkuchera / canalyze-fw
  Firmware for the CANalyze hardware.
  ☆69Updated last year
• fabiobaltieri / open-usb-can
  Open Source USB to CANBUS interface
  ☆109Updated last year
• togglebit / ArduinoDUE_OBD_FreeRunningCAN
  These classes have been built with free-running CAN and OBDII data acq in mind
  ☆50Updated 3 years ago
• caran / can4python
  ☆41Updated 2 years ago
• openvehicles / CAN-RE-Tool
  A reverse engineering tool for systems based on CAN bus communications
  ☆83Updated 4 years ago
• krumboeck / usb2can
  SocketCAN driver for UAB "8 devices" USB2CAN interface
  ☆53Updated 3 years ago
• djs / obdii
  ELM327-compatible open-source OBD-II software
  ☆35Updated 10 years ago
• macchina / m2-enclosures
  3D-printable M2 enclosures designed by Macchina
  ☆25Updated 5 years ago
• sparkfun / ESP32_Thing_Plus
  ESP32 Thing-compatible board using the WROOM module and a QWIIC connector.
  ☆21Updated 2 years ago
• CANBus-Triple / CANBus-Triple-Hardware
  Eagle CAD files for CANBus Triple Hardware
  ☆56Updated 8 years ago
• AppSaloon / ecu-can-bus-simulator
  This is a small example sketch that simulates a cars ecu
  ☆80Updated 4 years ago
• collin80 / GVRET
  Generalized Vehicle Reverse Engineering Tool - firmware for Arduino Due based boards
  ☆106Updated 6 years ago
• Spartelfant / ELM327-BT
  ELM327-based OBD-II Bluetooth interface
  ☆80Updated 5 years ago
• macchina / m2-hardware
  Designs for the Macchina M2
  ☆93Updated 5 years ago
• openxc / reference-vi
  Open Source Hardware Schematics for OpenXC Vehicle Interface
  ☆39Updated 4 years ago
• normaldotcom / CANard
  A fork of CANard with various tweaks and improvements implemented
  ☆50Updated 6 years ago
• huirad / rpi_obd2
  Minimalistic access to OBD2 data with an ELM327 compatible adapter
  ☆22Updated 10 years ago
• dchad / OBD-Monitor
  Tools for interfacing with vehicle engine control units using the OBD-II protocol.
  ☆69Updated 4 years ago
• LibreSolar / rpi-can
  CAN bus interface for Raspberry Pi (Zero W)
  ☆25Updated 7 years ago
• kahiroka / slcanuino
  USB-CAN(SocketCAN) sketch for Arduino CAN-BUS shield
  ☆138Updated 3 years ago
• beyerch / DHP_Kepler
  Automotive Vehicle Interface Hardware (CAN / VPW / A2D / BT 4.1 / USB / SDCARD)
  ☆38Updated 7 years ago
• ihaque / arduino-ecu-logger
  Arduino-based OBD2 engine monitor and data logger
  ☆36Updated 9 years ago