macchina / m2-hardwareLinks
Designs for the Macchina M2
☆92Updated 4 years ago
Alternatives and similar repositories for m2-hardware
Users that are interested in m2-hardware are comparing it to the libraries listed below
Sorting:
- Generalized Vehicle Reverse Engineering Tool - firmware for Arduino Due based boards☆101Updated 6 years ago
- Firmware for the CANalyze hardware.☆68Updated last year
- An open source TCM for Daimlers 722.6 gearbox. Resource repository☆116Updated 9 months ago
- ELM327-based OBD-II Bluetooth interface☆80Updated 5 years ago
- ELM327 based vehicle's CAN bus sniffer☆64Updated 6 years ago
- This repository conatains tools to reflash a PQ35 VW EPS, it also contains some useful libraries to deal with the TP 2.0 transport layer …☆124Updated last year
- ☆24Updated 5 years ago
- Hardware for a CAN to USB bridge.☆57Updated 6 years ago
- USB-CAN(SocketCAN) sketch for Arduino CAN-BUS shield☆135Updated 3 years ago
- GVRET fork to Macchina M2 board☆73Updated 4 years ago
- CAN Bus Bridge / Smart Repeater☆37Updated 4 months ago
- J2534 drivers for various Macchina hardware☆97Updated 2 years ago
- Arduino firmware for Sardine CAN (Open Source J2534 device)☆83Updated 10 years ago
- CAN Bus logger with SD card implemented using ChibiOS☆70Updated 6 years ago
- CAN_Interface for ESP32 (Cannelloni Protocol)☆55Updated 4 years ago
- PIC Bootloader for ELM327SLCAN☆22Updated 6 years ago
- A reverse engineering tool for systems based on CAN bus communications☆82Updated 4 years ago
- An Arduino based LINBUS stack and signal interceptor/injector.☆192Updated 6 years ago
- The KWP2000 is a communications protocol used for on-board vehicle diagnostics systems (OBD) by Suzuki (SDS), Kawasaki (KDS), Yamaha (YDS…☆261Updated 2 years ago
- An Arduino sketch to read data from a CAN bus☆96Updated 6 years ago
- Arduino MCP2515 CAN interface library☆39Updated 5 years ago
- Win32 DLL for Sardine CAN (Open Source J2534 device)☆53Updated 10 years ago
- Jetta TDI aux display☆18Updated 5 years ago
- Arduino Uno powered OBD2 ECU Simulator 'Stand alone or qt5 GUI control'☆57Updated 5 years ago
- K-line/Serial/CAN interface and fuel mapper for motorcycles.☆90Updated 5 years ago
- swiss army knife of Controller Area Networks (CAN) often used in cars and building automation, etc...☆204Updated 2 years ago
- OBD-II CAN adapter for Particle Electron, Photon, and RedBear Duo☆106Updated 6 years ago
- ELM327 firmware for pic18f25k80 chip from china clone OBD2 diag boxes☆40Updated 7 years ago
- microRusEfi board for rusEfi ECU☆77Updated 8 months ago
- This is a small example sketch that simulates a cars ecu☆79Updated 4 years ago