Alternatives and similar repositories for purethermal1-uvc-capture

Users that are interested in purethermal1-uvc-capture are comparing it to the libraries listed below

• groupgets / GetThermal
  Cross-platform USB thermal camera viewer
  ☆245Updated 2 months ago
• groupgets / pylepton
  Quick and dirty pure python library for interfacing with FLIR lepton
  ☆208Updated 2 months ago
• groupgets / purethermal1-firmware
  Reference firmware for PureThermal 1 FLIR Lepton Dev Kit
  ☆132Updated 2 months ago
• Kheirlb / purethermal1-uvc-capture
  Raw Thermal Data over UVC from PureThermal 2 - Lepton 3.5 - Python
  ☆60Updated 5 years ago
• groupgets / LeptonModule
  Code for getting started with the FLIR Lepton breakout board
  ☆328Updated 2 months ago
• ArduCAM / ArduCAM_USB_Camera_Shield
  This is the repository for ArduCAM USB Camera Shield
  ☆131Updated last year
• ArduCAM / MIPI_Camera
  ☆249Updated 11 months ago
• peeyush-sharma / lepton_grabber
  A python script to grab images from multiple FLIR lepton sensor based purethermal boards.
  ☆17Updated 8 years ago
• RidgeRun / NVIDIA-Jetson-IMX477-RPIV3
  NVIDIA Jetson IMX477 HQ RPI V3 camera driver
  ☆133Updated 2 years ago
• themainframe / leptonic
  A web GUI and several utilities for working with FLIR® Lepton® 3 LWIR camera modules.
  ☆53Updated last year
• Myzhar / Lepton3_BBB
  A grabber for BeagleBone Blue to acquire thermal images from Lepton3 sensor
  ☆13Updated 5 years ago
• NVIDIA-AI-IOT / argus_camera
  Simple Python / C++ interface to CSI camera connected to NVIDIA Jetson.
  ☆90Updated 6 years ago
• TheImagingSource / Linux-tiscamera-Programming-Samples
  Programming samples in Python and C++ for the tiscamera GStreamer modules.
  ☆76Updated last year
• Myzhar / Lepton3_Jetson
  Library and examples to connect the FLIR Lepton3 thermal camera to Nvidia Jetson embedded boards
  ☆56Updated 2 years ago
• dcaulton / thermal
  Raspberry Pi + camera and FLIR Lepton + image analysis, adjustment and overlaying
  ☆24Updated 9 years ago
• adafruit / Adafruit_CircuitPython_BNO055
  CircuitPython driver for BNO055 absolute orientation sensor
  ☆92Updated 3 weeks ago
• Hermann-SW / Raspberry_v1_camera_global_external_shutter
  Enable Raspberry v1 camera to do global external shutter capturing
  ☆95Updated 4 years ago
• LJMUAstroecology / flirpy
  Python library to interact with FLIR camera cores
  ☆218Updated 3 months ago
• josepbordesjove / FLiR-lepton
  Arduino application. This application captures an image with the FLiR Lepton and prints it.
  ☆38Updated 8 years ago
• ArduCAM / Arducam-Pivariety-V4L2-Driver
  This driver is used for Arducam mipi camera with Pivariety board
  ☆44Updated 2 years ago
• rbonghi / jetson_easy
  🔩 Automatically script to setup and configure your NVIDIA Jetson [Nano, Xavier, TX2i, TX2, TX1, TK1] . This script run different modules…
  ☆292Updated 4 years ago
• raspberrypi / raspiraw
  Example app directly receiving raw data from CSI2 sensors
  ☆267Updated last year
• ArduCAM / RaspberryPi
  This is Arducam camera demos used on Raspberry Pi paltform
  ☆184Updated last year
• beagleboard / beaglebone-blue
  BeagleBoard.org BeagleBone Blue - BeagleBone optimized for mobile robotics
  ☆163Updated 4 years ago
• realizator / stereopi-kicad-schematic
  StereoPi KiCad schematics
  ☆43Updated 5 years ago
• jacobfeldgoise / ThermalDrone
  ☆9Updated 3 years ago
• JetsonHacksNano / installSwapfile
  Install a swap file on the NVIDIA Jetson Nano Developer Kit. This should help with memory pressure issues.
  ☆146Updated 5 years ago
• TradeCrafter / lepton3
  C++ code on QT GUI for lepton v3, with 160x120 framesize, needs improvements !!
  ☆17Updated 8 years ago
• alliedvision / examples
  Code examples for Allied Vision Alvium CSI-2 camera, V4L2
  ☆41Updated 4 months ago
• JetsonHacksNano / installROS
  Install ROS (Robot Operating System) Melodic on NVIDIA Jetson Nano Developer Kit
  ☆79Updated 3 years ago