peeyush-sharma / lepton_grabber
A python script to grab images from multiple FLIR lepton sensor based purethermal boards.
☆16Updated 7 years ago
Alternatives and similar repositories for lepton_grabber:
Users that are interested in lepton_grabber are comparing it to the libraries listed below
- A web GUI and several utilities for working with FLIR® Lepton® 3 LWIR camera modules.☆50Updated 9 months ago
- USB Video Class capture examples for PureThermal 1 / PureThermal 2 FLIR Lepton Dev Kit☆133Updated last year
- A grabber for BeagleBone Blue to acquire thermal images from Lepton3 sensor☆13Updated 4 years ago
- Reference firmware for PureThermal 1 FLIR Lepton Dev Kit☆132Updated 3 years ago
- ☆9Updated 3 years ago
- Arduino application. This application captures an image with the FLiR Lepton and prints it.☆37Updated 8 years ago
- Arduino Library for the Lepton FLiR Thermal Camera Module.☆60Updated 2 years ago
- Code and libraries to use a FLIR Lepton Thermal Imaging Camera Module☆187Updated last year
- Raw Thermal Data over UVC from PureThermal 2 - Lepton 3.5 - Python☆60Updated 5 years ago
- C++ code on QT GUI for lepton v3, with 160x120 framesize, needs improvements !!☆17Updated 7 years ago
- Firmware for my ESP32-based hand-rolled LWIR camera device☆49Updated 6 years ago
- CanberraUAV OBC code☆39Updated last year
- An embedded linux flir lepton camera design package☆27Updated 8 years ago
- ☆43Updated 4 years ago
- GPS parsing module for CircuitPython. Meant to parse NMEA data from serial GPS modules.☆78Updated last month
- CircuitPython driver for BNO055 absolute orientation sensor☆88Updated last month
- Commandline program for reading a Bosch BNO055 IMU sensor over I2C under Linux☆40Updated last year
- ☆24Updated 10 months ago
- Python library for the PWM3901 optical flow-rate sensor☆33Updated 10 months ago
- ☆40Updated 4 years ago
- This driver is used for Arducam mipi camera with Pivariety board☆41Updated 2 years ago
- Smaller PocketBeagle version of the BBBmini flight controller.☆85Updated 6 years ago
- ☆22Updated 8 years ago
- RTIMULib makes it easy to use 9-dof IMUs with embedded Linux systems (especially the Raspberry PI!)☆48Updated 3 years ago
- Commandline program for reading a Hillcrest Labs Bosch BNO080 IMU sensor over I2C under Linux☆17Updated 5 years ago
- Library and examples to connect the FLIR Lepton3 thermal camera to Nvidia Jetson embedded boards☆55Updated 2 years ago
- LePi is a lightweight library for FLIR Lepton (2, 2.5 and 3) and Raspberry pi.☆27Updated 7 years ago
- FLIR Lepton ROS node☆14Updated 9 years ago
- Lepton 3 for the Raspberry Pi☆20Updated 7 years ago
- OpenIMU - Open Hardware Mini Logger based on ESP32☆42Updated 2 years ago