florianklingler / OpenC2X-embeddedLinks
This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins or for reporting issues. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git. All issues should be reported at: https://bugs.openwrt.org
☆18Updated 7 years ago
Alternatives and similar repositories for OpenC2X-embedded
Users that are interested in OpenC2X-embedded are comparing it to the libraries listed below
Sorting:
- Open Source Experimental and Prototyping Platform Supporting ETSI ITS-G5☆35Updated 7 years ago
- This repository contains some documentation to configure an 802.11p device using an apu1d4 board☆11Updated 9 years ago
- 802.11p standard and V2X applications on commercial Wi-Fi cards☆63Updated 7 years ago
- Traffic Signal Controller Broadcast Message (TSCBM) parser/decoders in Python and C. Includes Python/C binding examples.☆14Updated 3 years ago
- mac80211/wireless next tree☆31Updated 6 years ago
- Open-source implementation of the ETSI C-ITS protocol stack☆217Updated this week
- V2X Hub is a message handler that acts as a translator and data aggregator/disseminator for infrastructure components of a connected vehi…☆133Updated last week
- Patched version of OpenWrt 21.02.1, enabling support to DSRC V2X (Vehicle-to-Everything) communications, including IEEE 802.11p channel u…☆17Updated 2 years ago
- V2X Interface for ROS2☆30Updated 5 years ago
- DSRC tutorial, RSU, OBU☆31Updated 2 years ago
- V2Verifer is an open-source project dedicated to wireless experimentation focused on the security of vehicle-to-vehicle (V2V) communicati…☆40Updated 5 months ago
- Dedicated short-range communication module for V2V using 802.11p.☆28Updated 3 years ago
- ROS driver for V2X (both C-V2X and DSRC) radios☆14Updated this week
- An Arduino library which allows you to communicate seamlessly with u-blox GNSS modules using the Configuration Interface☆86Updated last month
- CAN bus interface for Raspberry Pi (Zero W)☆25Updated 7 years ago
- The RISE Self-Driving Model Vehicle Platform☆137Updated last year
- This repository offers J2735 standard messages modules for Python based on Pyasn.1 library. Some other utility functions are also made av…☆12Updated 4 years ago
- CAN and CAN-FD demonstration code for SAMC21-XPRO☆14Updated 8 years ago
- CommsDSL schema-based definition of UBLOX protocol☆42Updated 4 months ago
- OpenIMU - Open Hardware Mini Logger based on ESP32☆42Updated 3 years ago
- MCU driver/HAL for the Picocell Gateway concentrator board.☆52Updated 6 years ago
- ☆14Updated 4 years ago
- Communications protocol generation software☆36Updated 2 months ago
- A driver for the NMEA2000 library and standard linux socketCAN devices☆36Updated 5 years ago
- The projects demonstrates a transmitter device (implemented on a stand alone Nucleo-WL55JC1 board) and a receiver (implemented on a secon…☆13Updated 2 years ago
- Neato XV-11 LIDAR connected to an STM32F429IDISCOVERY board for 360-degree range scanning and measurement☆41Updated 11 years ago
- filter to decode signals in combination with candump (socketcan tools)☆21Updated 5 years ago
- ☆15Updated 3 years ago
- A low cost, lightweight autonomous LTE network, building upon virtualization techniques and open source software stacks.☆18Updated 5 years ago
- A repository of basic codes and usage instructions for Mocar V2X devices. The project is sponsored by Shanghai Jiaotong University☆18Updated 6 years ago