Alternatives and similar repositories for hardware

Users that are interested in hardware are comparing it to the libraries listed below

• steve-m / Pico-100BASE-TX
  Bit-banged 100 MBit/s Fast Ethernet transmitter and UDP framer for Raspberry Pi RP2040/RP2350
  ☆202Updated 2 weeks ago
• dupontgu / scopin-sans-typeface
  Fully generated typeface that makes text look like it is being viewed as serial data on an oscilloscope
  ☆72Updated last year
• wolfgangfriedrich / P42-Pico_Mdot2
  A RPi Pico RP2350A microcontroller board in m.2 3024 size form factor with A and E key.
  ☆24Updated 6 months ago
• openwch / ch570
  CH570 is the world’s cheapest RISC-V 2.4GHz wireless & USB2 SoC, costing just about a dime (10 cents)!
  ☆57Updated last month
• mitxela / clock4
  ☆91Updated last week
• humancomputerintegration / ecoEDA
  This repository contains our software tool, ecoEDA, presented in the paper "ecoEDA: Recycling E-Waste during Electronics Design", which a…
  ☆131Updated last year
• the6p4c / pawpad
  a (WIP) paw-shaped pogo pin connector
  ☆57Updated 3 years ago
• m1geo / Pi5_PCIe
  A crude reverse engineering of the Pi5 PCIe connector & potential breakout boards.
  ☆80Updated last year
• sitronlabs / Solder-Ninja-Pen-Hardware
  Enclosure and Circuit Board for the Solder Ninja Pen
  ☆34Updated last year
• tvlad1234 / Pico-10BASE-T-Library
  Library which allows the Pi Pico to send UDP packets over 10BASE-T Ethernet
  ☆10Updated 3 years ago
• osresearch / pixel-wrangler
  HDMI to whatever adapter
  ☆119Updated 2 years ago
• rtestardi / usbte
  Web USB Flea-Scope™ GUI/deep-dive UI and general-purpose terminal emulator (well, without actual emulation :-)
  ☆38Updated 9 months ago
• schlae / cm5-reveng
  Reverse engineered Raspberry Pi Compute Module 5
  ☆255Updated 2 months ago
• splitbrain / pinoutleaf
  Create printable pinout diagrams
  ☆141Updated 3 months ago
• gabrielguerrer / rng_rava
  RAVA: an Open Hardware True Random Number Generator based on Avalanche Noise
  ☆81Updated last year
• pmarques-dev / PicoEncoder
  High resolution quadrature encoder using the PIO on the RP2040
  ☆61Updated 6 months ago
• signaloid / C0-microSD-Hardware
  Verilog design examples for use with the Signaloid C0-microSD
  ☆50Updated 2 weeks ago
• blackmagic-debug / bmputil
  A tool for managing and flashing Black Magic Probe firmware
  ☆39Updated last month
• timonsku / Touchpad-Generator
  Generates a 2D touchpad / trackpad XY pattern and creates a fully routed PCB out of it
  ☆54Updated 8 months ago
• RainbowLabsDE / PDBrick
  A 1.7kW USB-C PD power supply
  ☆103Updated last year
• Breadstick-Innovations / Raspberry-Breadstick
  A Breadstick development board based around the Raspberry Pi Foundation's RP2040 microcontroller.
  ☆15Updated last year
• will127534 / PCIe3_Hub
  A opensource PCIe 3.0 Hub design based on ASM2806 with Raspberry Pi 5's PCIe FPC connector design
  ☆80Updated last year
• antmicro / arvsom
  System on Module based on StarFive 71x0 SoC.
  ☆43Updated 2 years ago
• linalinn / kicad-render
  github action for rendering kicad 3D images
  ☆109Updated 3 months ago
• eeucalyptus / ch32v003-usbpd
  Use the ch32v003 as a usb pd controller
  ☆46Updated last year
• JackToaster / framework_logic_analyzer
  16 channel USB 3 Logic analyzer expansion card for Framework laptop
  ☆39Updated last year
• aappleby / picorvd
  GDB-compatible RISC-V Debugger for CH32V003 that runs on a Raspberry Pi Pico
  ☆228Updated 9 months ago
• AnasMalas / pcb-edge-usb-c
  Use your PCB itself as a USB C connector! Including 10,14, and 24 Pin versions
  ☆499Updated last week
• cnlohr / cnhardware
  My dumping grounds for all my kicad projects and random hardware bringup.
  ☆78Updated this week
• adafruit / M.2
  Discussion, files, spec, and more for a M.2 standard for makers
  ☆34Updated 4 years ago