Alternatives and similar repositories for crcbeagle:

Users that are interested in crcbeagle are comparing it to the libraries listed below

• I-CAN-hack / rh850-glitch
  Collection of RH850 Glitches
  ☆52Updated last year
• JohannesObermaier / f103-analysis
  ☆95Updated 3 years ago
• robbederks / FlexRayAnalyzer
  Saleae Logic plugin for decoding FlexRay packets
  ☆81Updated 4 years ago
• I-CAN-hack / pq-flasher
  This repository conatains tools to reflash a PQ35 VW EPS, it also contains some useful libraries to deal with the TP 2.0 transport layer …
  ☆118Updated 11 months ago
• gregjhogan / renesas-bootmode
  serial interface library for renesas microcontrollers in boot mode
  ☆48Updated 5 years ago
• jglim / UnsignedFlash
  Firmware signature bypass on the IC204
  ☆25Updated 3 years ago
• macchina / m2-hardware
  Designs for the Macchina M2
  ☆85Updated 4 years ago
• doegox / stm32f1-firmware-extractor
  Fork of https://gitlab.zapb.de/zapb/stm32f1-firmware-extractor
  ☆83Updated 3 years ago
• buildxyz-git / nrfsec
  ☆45Updated 3 years ago
• mintynet / value-pasta-auto
  I have created a lower cost approximation of the Toyota PASTA:Portable Automotive Testbed with Adaptability using consumer hardware and A…
  ☆75Updated last year
• damienmaguire / BMW-i3-CCS
  Reverse engineering of the BMW i3 LIM (charge control) module for purposes of opensource CCS fast charging
  ☆46Updated last year
• esaulenka / ghidra_v850
  Ghidra support for Renesas V850 MCUs
  ☆68Updated last month
• DigitalSecurity / imx-nand-tools
  Firmware reverse-engineering tools for i.MX NAND flash
  ☆49Updated 3 months ago
• I-CAN-hack / flexray-interceptor
  FPGA project to man-in-the-middle attack Flexray
  ☆81Updated 4 years ago
• szymonh / JTAGscan
  Identify JTAG ports using your favorite Arduino.
  ☆58Updated 2 years ago
• bri3d / Simos18_SBOOT
  Documentation and tools about Simos18 SBOOT (Supplier Bootloader), including a Seed/Key bypass and Tricore boot password recovery tool.
  ☆104Updated 2 years ago
• volumit / package_494
  GCC 4.9.4/Binutils 2.20/Newlib Source code for Tricore Aurix
  ☆22Updated 3 years ago
• damienmaguire / Tesla-Model-3-Drive-Unit
  Open Source logic board for the Tesla Model 3 rear drive unit. PCB Files in DesignSpark 8 format.
  ☆54Updated last week
• akpc806a / CAN_Logger
  CAN Bus logger with SD card implemented using ChibiOS
  ☆68Updated 5 years ago
• akpc806a / CAN_Bridge
  CAN Bus Bridge / Smart Repeater
  ☆34Updated 6 years ago
• jgressmann / supercan
  This is project SuperCAN. An open source USB to CAN-FD protocol.
  ☆78Updated last week
• collin80 / GVRET
  Generalized Vehicle Reverse Engineering Tool - firmware for Arduino Due based boards
  ☆100Updated 6 years ago
• berney / reveng
  Unnofficial mirror of http://reveng.sourceforge.net/
  ☆29Updated 8 years ago
• bri3d / TC1791_CAN_BSL
  CAN Bootstrap Loader (BSL) for Tricore AudoMAX (TC1791 and friends), including arbitrary read/write as well as compressed read functional…
  ☆60Updated 3 years ago
• PhilippFux / ESP32_CAN_Interface
  CAN_Interface for ESP32 (Cannelloni Protocol)
  ☆52Updated 3 years ago
• bri3d / sa2_seed_key
  VW SA2 Seed/Key Authentication for Programming Sessions
  ☆83Updated 2 years ago
• linklayer / cantact-pro-fw
  Firmware for the CANtact Pro
  ☆46Updated last year
• RudolphRiedel / USB_CAN-FD
  This is an Open Source Hardware USB to CAN-FD Interface
  ☆58Updated last month
• SySS-Research / icestick-glitcher
  Simple voltage glitcher implementation for the Lattice iCEstick Evaluation Kit
  ☆55Updated 5 years ago
• linklayer / gs_usb_fd
  ☆13Updated 3 years ago