Alternatives and similar repositories for caps-lock-buzzer

Users that are interested in caps-lock-buzzer are comparing it to the libraries listed below

• DangerousPrototypes / bus_pirate_ng
  Bus Pirate NG firmware and hardware
  ☆39Updated 2 years ago
• wigman27 / Arduino-Programmable-Constant-Current-Power-Resistance-Load
  This is all of the code, datasheets and design files for my instructable
  ☆37Updated 9 years ago
• x893 / BusPirateConsole
  BusPirate Console
  ☆39Updated 8 years ago
• alunmorris / Multi-channel-wireless-voltmeter
  ☆14Updated 4 years ago
• sparkfun / ATmega128RFA1_Dev
  Development board design and example code for the ATmega128RFA1
  ☆20Updated 3 weeks ago
• smdprutser / SWM050
  ☆19Updated 6 years ago
• imsaiguy / NANOVNA-Demo-Board-SMA
  Gerbers for board
  ☆8Updated 4 years ago
• alunmorris / Multi-channel-autorange-OLED-voltmeter
  Minimalist 4-channel 0 to 27V meter using AVR microcontroller and 72x40 OLED display
  ☆19Updated last year
• jrsikken / ElectronicLoadR2
  Hardware of Jasper's Electronic Load R2
  ☆21Updated 6 years ago
• EnhancedRadioDevices / RF-Power-Meter
  ☆17Updated 7 years ago
• gavinlyonsrepo / Cap_meter_arduino
  Capacitance meter, Arduino-based, three tests , range 18pf to 4F , Push Button input , OLED and serial monitor output.
  ☆18Updated last year
• techie66 / CANSerial
  Serial port emulation over CAN bus
  ☆30Updated 3 years ago
• swharden / USB-Counter
  Open-source USB frequency counter
  ☆24Updated last year
• jrsikken / ElectronicLoadR3
  Hardware of Jasper's Electronic Load R3
  ☆25Updated 6 years ago
• computingthebishop / ReflowOven
  ☆13Updated 4 years ago
• bertrik / ElectronicLoad
  Arduino software for an electronically controlled load, based on a STM32 microcontroller
  ☆21Updated 4 years ago
• wagiminator / ATtiny814-Power-Analyzer
  Power Supply Analyzer with USB Interface
  ☆52Updated 2 years ago
• RoboticsBrno / RB0005-UniversalStepDown
  Universal step-down module
  ☆26Updated 4 years ago
• ANDnXOR / sao-reference-designs
  AND!XOR Reference Designs for SAOs
  ☆30Updated 6 years ago
• phishman / RDA1846
  RDA1846 VHF/UHF Transceiver Chip I2C library for Arduino
  ☆61Updated 7 years ago
• pierre-muth / pilogger
  Home logging station
  ☆12Updated 4 years ago
• designer2k2 / 2d-xmas-tree
  a DIY flat christmas decoration with a ATtiny25, 20 led´s and a coin cell battery
  ☆25Updated 4 years ago
• ArduinoHannover / ZPB30A1_Firmware
  Open-Source firmware for the ZPB30A1 electronic load (WIP)
  ☆50Updated 7 years ago
• galacticstudios / Logic-Meter
  ☆43Updated 4 years ago
• kaktus85 / MightyWattR3
  Resources for MightyWatt R3 electronic load
  ☆31Updated last month
• DangerousPrototypes / Bus_Pirate_Ultra
  Just messing with an FPGA
  ☆25Updated 5 years ago
• tobyjaffey / cctl
  ChipCon Tiny Loader, a 1KB serial bootloader for CC1110/CC1111
  ☆63Updated 12 years ago
• DangerousPrototypes / Sick_of_Beige
  ☆28Updated 9 years ago
• audiohacked / python-pyBusPirate
  Library for the Dangerous Prototypes Bus Pirate
  ☆40Updated 3 years ago
• salvatoreraccardi / Nordic-PPK2-USB_C-Adapter
  USB-C adapter for Nordic's Power Profiler Kit II. Ideal for easily measuring the current drawn by a device/board.
  ☆21Updated 3 years ago