chinezbrun / pytes_serialLinks
Read RS232 serial port of PYTES and PYLONTECH LiFePo4 batteries, send data to MQTT, JSON and MariaDB ,There is a build in integration with Home Assistant.
☆24Updated last week
Alternatives and similar repositories for pytes_serial
Users that are interested in pytes_serial are comparing it to the libraries listed below
Sorting:
- PYTES and PYLONTECH LiFePo4 batteries integration with Home Assistant via MQTT.☆11Updated 5 months ago
- Pace Battery Management System☆55Updated 7 months ago
- ESPHome component to monitor a Seplos Battery Management System (Seplos-BMS) via UART or RS485☆96Updated 2 weeks ago
- Home Assistant custom component for Pylontech (high voltage) BMS accessed via console☆16Updated 11 months ago
- Adding WiFi monitoring to US2000B and US2000C batteries.☆147Updated 2 years ago
- ESPHome component to monitor and control a PACE Battery Management System (PACE-BMS) via RS485 (Modbus)☆55Updated 2 weeks ago
- Read data From Seplos BMS and send them to the Home Assistant☆44Updated last year
- MQTT adapter for SMA YASDI inverters☆26Updated 8 months ago
- Python lib to talk to pylontech lithium batteries 🔋 (US2000, US3000, ...) using RS485☆76Updated last year
- Plugin for FlashMQ that interfaces between DBUS and MQTT.☆52Updated 3 weeks ago
- Use official Victron BLE endpoint for fetching data from Victron devices via Bluetooth LE via ESPHome.☆279Updated 2 months ago
- Esphome component for Deye 3 phase inverters for Home Assistant☆169Updated 5 months ago
- Venus OS service mapping the D-Bus on Venus OS to MQTT☆114Updated last year
- Manages Victrion VenusOs VeCan (aka CANbus) ports☆50Updated 2 months ago
- ESPHome component to monitor a Jikong Battery Management System (JK-BMS) via RS485 or BLE, CAN bus Goodwe/Pylon☆187Updated 8 months ago
- This Venus OS driver gets the data from MQTT and displays it as solar charger.☆23Updated 3 months ago
- Protocol description for modbus Goodwe DT inwerters☆18Updated 4 years ago
- This Venus OS driver gets the data from MQTT and displays it as grid, genset or ac load meter.☆83Updated last month
- ☆100Updated last month
- This integration allows to monitor Bluetooth Low Energy (BLE) battery management systems (BMS) from within Home Assistant.☆157Updated this week
- SmartShunt ve.direct to ESPHOME node☆71Updated last year
- Firmware battery safety controller (BSC)☆124Updated this week
- An implementation of the Tigo TAP protocol☆47Updated 3 months ago
- Modbus RTU to MQTT Gateway☆88Updated last month
- Integration for Home Assistant to fetch data from the victron gx device via modbusTCP☆244Updated 3 months ago
- A simple Python Script for reading Growatt PV Inverter Modbus RS485 RTU Protocol and storing into InfluxDB☆46Updated last year
- ESPHome component to simulate the current clamp to control the Soyosource GTN1200 limiter☆85Updated 2 weeks ago
- A service for Venus OS, reading smart meter data from a Fronius system and making the values available on dbus.☆56Updated 10 months ago
- A driver to integrate SMA SunnyIsland inverters with Victron Venus OS☆17Updated last month
- This Venus OS driver emulates a MultiPlus-II in order to see the right AC load and flow, if you have the MQTT PV, Grid and Battery driver…☆20Updated 7 months ago