byu-cpe / ComputingBootCampLinks
☆11Updated 8 months ago
Alternatives and similar repositories for ComputingBootCamp
Users that are interested in ComputingBootCamp are comparing it to the libraries listed below
Sorting:
- IEEE Solid-State Circuits Society (SSCS) Open-Source Ecosystem (OSE)☆202Updated last month
- Files for Advanced Integrated Circuits☆36Updated 3 weeks ago
- ☆86Updated last year
- ☆40Updated 2 years ago
- A Python package to use FPGA development tools programmatically.☆143Updated 10 months ago
- EE 628: Analysis and Design of Integrated Circuits (University of Hawaiʻi at Mānoa)☆174Updated 6 months ago
- ☆173Updated 2 years ago
- Hardware Description Library☆88Updated last week
- Temporary repo to gather information about the Kria KV260 board☆76Updated 4 years ago
- repository for a bandgap voltage reference in SKY130 technology☆41Updated 3 years ago
- Blender GDSII Importer with PDK Support☆77Updated last week
- Course material for a basic hands-on analog circuit design course with IC emphasis☆178Updated last week
- Documentation for the 5 day workshop: Advanced Physical Design using OpenLane/Sky130☆74Updated 3 years ago
- Verilog-A simulation models☆91Updated 3 months ago
- Blocks & Bots: An Open Chip Playground augmented with LLMs. Please check: https://sscs.ieee.org/technical-committees/tc-ose/sscs-pico-des…☆70Updated last month
- FOSS-ASIC-TOOLS is all in one container for SKY130 based design both Analog and Digital. Below is a list of the current tools already ins…☆106Updated last year
- ☆41Updated 3 years ago
- Design of 1024x32 SRAM (32Kbits) using OpenRAM and SKY130 PDKs with operating voltage of 1.8V and access time < 2.5ns☆82Updated 4 years ago
- Primitives for GF180MCU provided by GlobalFoundries.☆56Updated 2 years ago
- This course gives an introduction to digital design tool flow in Xilinx programmable devices using Vivado® Design software suite☆102Updated 6 years ago
- ☆17Updated 3 years ago
- ☆24Updated last year
- Fully-differential asynchronous non-binary 12-bit SAR-ADC☆39Updated 2 years ago
- Python port of Prof. Boris Murmann's gm/ID Starter Kit☆55Updated 8 years ago
- Integration on PL side of Zynq7000 for PYNQ framework of common industrial devices (GPIO, I2C, SPI and UART)☆38Updated 4 years ago
- This repository contains all the contents studied and created during the Advanced Physical Design Workshop using OpenLANE and SKY130 PDK☆45Updated 3 years ago
- Conda recipes for FPGA EDA tools for simulation, synthesis, place and route and bitstream generation.☆101Updated last year
- The project is about building an 8-row by 8-bit 6T SRAM memory array, & a 3-to-8 decoder that's used to access the SRAM array. The layout…☆83Updated 3 years ago
- PYNQ support and examples for Kria SOMs☆123Updated last year
- skywater 130nm pdk☆41Updated this week