bitconnector / ttn_mapper_t-beam
☆26Updated last year
Alternatives and similar repositories for ttn_mapper_t-beam:
Users that are interested in ttn_mapper_t-beam are comparing it to the libraries listed below
- TTNMapper on the TTGO T-Beam☆59Updated 6 months ago
- TTGO T-Beam Tracker for TTN Mapper and TTN Tracker using US (915 MHz) and EU (868 MHz) frequencies☆275Updated last month
- Download GPS data transmitted to The Things Network for live display on a map☆62Updated 3 years ago
- TTNMapper Arduino script for the CubeCell GPS-6502 board☆9Updated 3 years ago
- Code to make experiment on TTN Mapper with GPS and TTGO☆54Updated 4 years ago
- LoRaWan GPS Mapper for TTN and Helium Network, using the TBeam1.2 SX1262☆9Updated 3 months ago
- TTNMapper on the TTGO T-Beam☆109Updated 3 years ago
- Read data from victron mppt and transport to mqtt server☆41Updated 2 years ago
- A mini battery powered LoRa weather station to measure temperature, humidity and barometric pressure.☆34Updated 2 years ago
- Bresser 5-in-1/6-in-1/7-in-1 868 MHz Weather Sensor Radio Receiver for Arduino based on CC1101, SX1276/RFM95W, SX1262 or LR1121☆135Updated last week
- ☆289Updated this week
- ☆61Updated 10 months ago
- WASN LoRaWan Devices Getting Started Guide☆22Updated last year
- Bresser 5-in-1/6-in-1/7-in-1 868 MHz Weather Sensor Radio Receiver based on ESP32 and RFM95W/SX1276 - sends data to a LoRaWAN Network (e.…☆23Updated 3 months ago
- ESP82XX based connector for EPEver Solar tracker systems, control and watch Multiple devices over webinterface and MQTT☆48Updated 4 months ago
- ESPHome component to read out DLMS smart meters via M-Bus☆107Updated 9 months ago
- AS3935 and ESP8266 based Franklin Lightning Detector☆43Updated last week
- ☆32Updated 3 years ago
- A node red based dashboard for most EPEver/EPSolar solar charge controllers.☆68Updated last year
- M-Bus gateway with web server based on ESP8266 NodeMCU☆24Updated 3 months ago
- Use TTGO T-Beam as LoRa APRS Tracker☆103Updated last year
- Use an ESP8266 to read live-, statistical- and status-data from an EpEver LandStar (LS1024B) via Modbus and publish using MQTT☆33Updated 6 years ago
- a software for a raspberry pi zero to read the production of aps inverters yc600 and qs1☆47Updated 3 weeks ago
- Reset U-blox NEO GPS devices on TTGO T-beam T22- V1.0 and 1.1 back to factory settings☆67Updated 3 years ago
- ☆26Updated 2 months ago
- Connect the EPSolar/EPEver Tracer A/B Series (RS-485 Modbus) to an ESP8266/ESP32 and monitor using Blynk /Homeassistant/MQTT... .☆53Updated 4 months ago
- This is a LoRa APRS iGate/Digi based on an ESP32☆366Updated 5 months ago
- Meshtastic Nodes via MQTT for Home Assistant☆39Updated 2 months ago
- Meshtastic+ device firmware☆12Updated this week
- This project is for connecting to EPEver charge controllers over WiFi for viewing running stats and also allows automatic posting of them…☆69Updated 6 months ago