chrisys / mini-lora-weatherstation
A mini battery powered LoRa weather station to measure temperature, humidity and barometric pressure.
☆34Updated 3 years ago
Alternatives and similar repositories for mini-lora-weatherstation:
Users that are interested in mini-lora-weatherstation are comparing it to the libraries listed below
- ☆32Updated 3 years ago
- TTNMapper on the TTGO T-Beam☆59Updated 7 months ago
- Download GPS data transmitted to The Things Network for live display on a map☆62Updated 3 years ago
- Code to make experiment on TTN Mapper with GPS and TTGO☆54Updated 4 years ago
- ☆42Updated 3 years ago
- Battery/solar-powered ESP32 TTN (LoraWAN) sensor for measuring temperature, humidity, air pressure and fine dust.☆22Updated 2 years ago
- ATtiny85 based LoRa atmospheric sensor board with BME280☆28Updated 6 years ago
- Arduino Pro Mini TTN LoRaWAN Node with RFM95 module battery-powered☆29Updated 3 years ago
- ☆82Updated 10 months ago
- Lora Soil Moisture Sensor☆55Updated 2 years ago
- WASN LoRaWan Devices Getting Started Guide☆22Updated last year
- TTNMapper on the TTGO T-Beam☆109Updated 3 years ago
- TTNMapper Arduino script for the CubeCell GPS-6502 board☆9Updated 3 years ago
- BME280 and Adruino ProMini based enviromental node with LMIC ABP.☆35Updated 6 years ago
- Particulate matter sensor using LoRaWAN as the transport mechanism☆11Updated 2 years ago
- Lmic (LoraWAN-in-C) modified to C++☆67Updated last month
- This repository contains all the code and steps required to setup a BME280 with the Heltec CubeCell HTCC-AB01 on TTN Australia.☆17Updated 4 years ago
- Documents and Code for use with Heltec CubeCell LoraWAN Node Boards, Capsule, and Modules☆28Updated 5 years ago
- TTGO ESP32 PAXCOUNTER LoRa32 V2.1 Sketch for TTN (The Things Network) (With BME280 support)☆39Updated 5 years ago
- ASR Microelectronics ASR650x: development platform for PlatformIO☆24Updated 2 years ago
- datasheet and Arduino demo code for LoRa Radio Node v1.0☆48Updated 6 years ago
- Some sample code for the TTGO ESP32 Oled Lora board.☆108Updated 5 years ago
- This decoder can be used for all LoRa nodes which are built based on RUI.☆27Updated 4 years ago
- LoRaWAN GPS Tracker for Coverage Mapping☆25Updated 6 years ago
- BasicMAC LoRaWAN stack that supports (but is not limited to) Arduino☆79Updated 4 years ago
- ☆62Updated 7 years ago
- ☆26Updated last year
- Arduino library for processing wind speed, wind wane and rain gauge sensors (WH 1080, Sparkfun)☆16Updated last year
- TTGO Lora Test code☆17Updated 4 years ago
- ☆13Updated 6 years ago