LukePrior / TTN-BME280-Weather-Station-Heltec-CubeCell-HTCC-AB01Links
This repository contains all the code and steps required to setup a BME280 with the Heltec CubeCell HTCC-AB01 on TTN Australia.
☆17Updated 4 years ago
Alternatives and similar repositories for TTN-BME280-Weather-Station-Heltec-CubeCell-HTCC-AB01
Users that are interested in TTN-BME280-Weather-Station-Heltec-CubeCell-HTCC-AB01 are comparing it to the libraries listed below
Sorting:
- TTNMapper on the TTGO T-Beam☆59Updated 11 months ago
- ☆32Updated 4 years ago
- BME280 and Adruino ProMini based enviromental node with LMIC ABP.☆35Updated 7 years ago
- TTNMapper on the TTGO T-Beam☆109Updated 3 years ago
- Using the BME680 to measure temperature, pressure, humdity and air quality☆141Updated 3 years ago
- TTGO T-Beam Tracker for TTN Mapper and TTN Tracker using US (915 MHz) and EU (868 MHz) frequencies☆277Updated 6 months ago
- Some sample code for the TTGO ESP32 Oled Lora board.☆109Updated 5 years ago
- ☆82Updated last year
- Arduino Pro Mini TTN LoRaWAN Node with RFM95 module battery-powered☆30Updated 4 years ago
- WASN LoRaWan Devices Getting Started Guide☆22Updated 2 years ago
- A mini battery powered LoRa weather station to measure temperature, humidity and barometric pressure.☆35Updated 3 years ago
- Arduino Mini Lora Battery/Sensors Board☆176Updated 4 years ago
- Download GPS data transmitted to The Things Network for live display on a map☆63Updated 3 years ago
- Lmic (LoraWAN-in-C) modified to C++☆68Updated 5 months ago
- Documents and Code for use with Heltec CubeCell LoraWAN Node Boards, Capsule, and Modules☆30Updated 5 years ago
- Arduino C++ code to communicate with a Microchip RN2483 module☆86Updated last year
- Code to read the VE.Direct-Protocol from serial into a value array. Uses a non-blocking read loop and does checksum verification before a…☆129Updated 3 years ago
- Heltec CubeCell Series (based on ASR6501, ASR6502 chip) Arduino support.☆271Updated last week
- ESP8266 WeMos Shield for HopeRF RFM95 RFM96 RFM98 Lora module☆234Updated 4 years ago
- LMIC-node | One example to rule them all. LMIC-node is an example LoRaWAN application for a node that can be used with The Things Network…☆238Updated last year
- ☆81Updated 4 years ago
- TTGO ESP32 PAXCOUNTER LoRa32 V2.1 Sketch for TTN (The Things Network) (With BME280 support)☆39Updated 5 years ago
- Code to make experiment on TTN Mapper with GPS and TTGO☆56Updated 5 years ago
- ☆13Updated 6 years ago
- ATtiny85 based LoRa atmospheric sensor board with BME280☆28Updated 6 years ago
- A Fork of the popular ESP8266 single channel gateway adapted to ESP32 on the 915Mhz band.☆74Updated 4 years ago
- Outdoor Weather Station with Wind Speed, direction &Rainfall sensors☆58Updated 7 years ago
- TTGO-T-Beam Arduino Car Tracker - ESP32 + LoRa + GPS + GSM (optional)☆179Updated last year
- ☆42Updated 3 years ago
- TTGO Lora Test code☆180Updated 4 years ago