vhuynen / CubeCell-AB01-LoRaWAN-Helium-Mailbox-NotifierLinks
It's an IoT DIY project which notifies you when you have received a parcel or a letter in your letterbox. This project uses an HelTec AB01 LoRaWAN module to send data over an LoRaWAN Gateway when WiFi is out of range. I use an Helium Gateway from the People's Network in order to forward packets over Helium Network which send data to AWS IoT Core…
☆10Updated last year
Alternatives and similar repositories for CubeCell-AB01-LoRaWAN-Helium-Mailbox-Notifier
Users that are interested in CubeCell-AB01-LoRaWAN-Helium-Mailbox-Notifier are comparing it to the libraries listed below
Sorting:
- ☆32Updated 4 years ago
- LMIC-node | One example to rule them all. LMIC-node is an example LoRaWAN application for a node that can be used with The Things Network…☆239Updated last year
- TTNMapper on the TTGO T-Beam☆109Updated 3 years ago
- TTNMapper on the TTGO T-Beam☆59Updated last year
- An Example of MQTT Discovery implementation for ESP32☆26Updated 2 years ago
- A mini battery powered LoRa weather station to measure temperature, humidity and barometric pressure.☆35Updated 3 years ago
- TTGO T-Beam Tracker for TTN Mapper and TTN Tracker using US (915 MHz) and EU (868 MHz) frequencies☆278Updated 8 months ago
- Download GPS data transmitted to The Things Network for live display on a map☆63Updated 3 years ago
- Battery/solar-powered ESP32 TTN (LoraWAN) sensor for measuring temperature, humidity, air pressure and fine dust.☆23Updated 3 years ago
- Lora/LoraWan Arduino board☆78Updated last week
- This repo provides additional examples for RUI3. It focuses on low power consumption and practical examples for range tests, location tra…☆14Updated 3 weeks ago
- A very flexible ESP32 power meter / energy meter with SCT-013-0x0, ZMPT101B, ACS712 sensors☆43Updated last year
- Lmic (LoraWAN-in-C) modified to C++☆68Updated 7 months ago
- Examples of using the ULP Co-Processor of the ESP32 with simple pulse counting, which I extended for also saving the shortest pulse.☆27Updated 3 years ago
- Documents and Code for use with Heltec CubeCell LoraWAN Node Boards, Capsule, and Modules☆30Updated 5 years ago
- ☆26Updated last year
- Create a TTN Mapper node with a Heltec Wifi Lora 32 V2☆18Updated 6 years ago
- ☆11Updated 3 years ago
- ☆41Updated 3 years ago
- Electricity monitoring library - install in Arduino IDE's libraries folder then restart the IDE☆73Updated last year
- WASN LoRaWan Devices Getting Started Guide☆22Updated 2 years ago
- Library for Arduino compatible with Cayenne Low Power Payload☆117Updated 2 weeks ago
- Heltec CubeCell Series (based on ASR6501, ASR6502 chip) Arduino support.☆272Updated 2 months ago
- Connect the EPSolar/EPEver Tracer A/B Series (RS-485 Modbus) to an ESP8266/ESP32 and monitor using Blynk /Homeassistant/MQTT... .☆56Updated 11 months ago
- Simple LoRa Node based on Arduino Pro mini with RFM95W module and PCB antenna.☆63Updated 6 years ago
- Code to make experiment on TTN Mapper with GPS and TTGO☆58Updated 5 years ago
- Bresser 5-in-1/6-in-1/7-in-1 868 MHz Weather Sensor Radio Receiver based on ESP32 and RFM95W/SX1276 - sends data to a LoRaWAN Network (e.…☆23Updated 10 months ago
- Lora Soil Moisture Sensor☆58Updated 3 years ago
- BasicMAC LoRaWAN stack that supports (but is not limited to) Arduino☆81Updated 4 years ago
- A Firmware for the H32 board that allows to directly start using the board productively☆33Updated last year