apertus-open-source-cinema / pcb-aoiLinks
OpenCV based automated optical PCB inspection
☆84Updated 3 years ago
Alternatives and similar repositories for pcb-aoi
Users that are interested in pcb-aoi are comparing it to the libraries listed below
Sorting:
- Antmicro's open hardware baseboard for the Google Coral i.MX8 + Edge TPU SoM☆80Updated 2 years ago
- Open Hardware carrier board supporting modules with Zynq 7000 All Programmable SoC devices.☆66Updated 2 years ago
- A digital Oscilloscope designed using Zedboard (Zynq7000Soc). The input signal is sample and processed using Zedboard and the sample dat…☆26Updated 5 years ago
- 🙌 Low-cost 2D ultrasound imaging hardware for makers☆39Updated 7 years ago
- KiCad PCB project of Logic Analyzer☆45Updated 5 years ago
- Prototype project to build an underwater sensor node, powered by and communicating with the surface via Single Pair Ethernet (10BASE-T1L …☆29Updated 2 years ago
- USBTMC DAC firmware for the stm32f4 discovery board☆25Updated 11 years ago
- High performance motor control☆106Updated 9 years ago
- PCB defect detection using low cost hardware and computer vision for automatic optical inspection (AOI)☆16Updated 5 years ago
- Small Heterogeneous & AI Powered Computing SBC Based on V853☆21Updated 3 years ago
- Firmware, schematic and board drawings for the CANine USBC↔︎CAN adapter☆13Updated last year
- Generic CNC firmware and driver for FPGA cards which are supported by LiteX☆77Updated 3 months ago
- ODB++ support for Python☆41Updated 6 years ago
- Capture data from multiple ADCs concurrently using an FPGA. Stream the captured data out over ethernet + UDP. Tested on the Spartan 6 XC6…☆17Updated 9 years ago
- 5MHz to 2.1GHz RF Synthesizer with modulation capability☆57Updated 3 years ago
- View Electronic Designs Online☆70Updated this week
- GerberCAM – Opensource PCB G-code Generator☆39Updated 10 years ago
- It started as some general experiments with RF stuff and gradually evolved into a (severely limited) spectrum analyzer.☆48Updated 6 years ago
- Main Probe Scope PCB Repo☆57Updated 6 years ago
- White and Flicker Noise Sources for LTspice☆28Updated 3 years ago
- This repo contains source, Documentation/reference PCB boards for USB3 camera interface with Lattice Crosslink NX FPGA☆19Updated 3 years ago
- Firmware to drive Cypress CX3 camera controller☆25Updated 8 years ago
- The Trinamic TMC429 is a triple-axis dedicated step and direction motion controller for both position and velocity control with accelerat…☆43Updated last month
- Hardware implementation of control algorithm for three phase voltage inverters. Implemented using Verilog and MATLAB. Tested with an impl…☆23Updated 6 years ago
- Open Source ML90640 Thermal Camera☆32Updated 6 years ago
- Antmicro's open hardware HDMI into MIPI CSI-2 converter☆104Updated last year
- Lattice Crosslink FPGA is programmed to simulate an IMX219 image stream to a Jetson Nano☆17Updated 4 years ago
- ☆14Updated 2 years ago
- Improved multislope ADC☆36Updated last year
- Zynq-Feather brings the power of a Xilinx Zynq SoC (ARM + FPGA) into the compact Adafruit Feather form factor — enabling modular, high-pe…☆49Updated 4 years ago