Alternatives and similar repositories for PyTrinamic

Users that are interested in PyTrinamic are comparing it to the libraries listed below

• NativeDesign / python-tmcl
  TMCL Serial interface to Trinamic Stepper Motors
  ☆19Updated 7 years ago
• Peter-van-Tol / LiteX-CNC
  Generic CNC firmware and driver for FPGA cards which are supported by LiteX
  ☆64Updated 2 months ago
• multigcs / LinuxCNC-RIO
  RealtimeIO for LinuxCNC based on an FPGA
  ☆77Updated 9 months ago
• janelia-arduino / TMC429
  The Trinamic TMC429 is a triple-axis dedicated step and direction motion controller for both position and velocity control with accelerat…
  ☆39Updated last year
• opengalvo / OPAL
  Minimalistic FW for Processing GCode to Galvanometer signals
  ☆91Updated 7 months ago
• LinuxCNC / mesaflash
  Configuration and diagnostic tool for Mesa Electronics PCI(E)/ETH/EPP/USB/SPI boards
  ☆36Updated 2 months ago
• ottoragam / Tarocco
  Closed Loop Motor Controller
  ☆134Updated 4 years ago
• pootle / tripipy
  Simple python driver for Trinamic tmc5130 connected to Raspberry Pi
  ☆38Updated 3 years ago
• linuxcnc-ethercat / linuxcnc-ethercat
  LinuxCNC EtherCAT HAL driver
  ☆49Updated last month
• freakontrol / stmbl
  ☆28Updated last month
• AlexmagToast / LinuxCNC_ArduinoConnector
  This Projekt enables you to connect an Arduino to LinuxCNC and provides as many IO's as you could ever wish for. This Software is used as…
  ☆81Updated last month
• tommag / TMC5160_Arduino
  Arduino library for Trinamic TMC5160 stepper motor driver
  ☆77Updated last year
• analogdevicesinc / TMC-API
  TRINAMIC's IC API
  ☆221Updated last week
• ZJAllen / ShushEngine
  Python stepper motor driver for TMC5160
  ☆15Updated 4 years ago
• mhouse1 / mechsoftronic
  FPGA based CNC Machine
  ☆90Updated 5 years ago
• scottalford75 / LinuxCNC-on-RPi
  ☆28Updated 4 years ago
• Psylenceo / TMC5160_FULL_SPI_CMD_Example
  This repo will contain the FULL SPI command structure for a TMC5160. To show all the stages of operation for a TMC5160 using only SPI com…
  ☆13Updated 5 years ago
• machinekit / machinekit-cnc
  CNC stack split out into a separate package
  ☆63Updated 5 years ago
• markmaker / PushPullFeeder
  All 3d-Printed Tape&Reel Feeder
  ☆79Updated 6 months ago
• phil-barrett / grblHAL-teensy-4.x
  GRBL Header for a Teensy 4
  ☆116Updated last year
• scottalford75 / Remora
  Remora is a free, opensource LinuxCNC component and Programmable Realtime Unit (PRU) firmware to allow LPC176x and STM32F4 micro-controll…
  ☆153Updated last month
• realthunder / fcad_pcb
  FreeCAD scripts for PCB CAD/CAM
  ☆142Updated 6 months ago
• FernV / NativeCAM
  NativeCAM for LinuxCNC embeds in axis or gmoccapy interfaces
  ☆47Updated 4 years ago
• makerbase-mks / MKS-SERVO42B
  MKS SERVO42B is 3d printer closed loop stepper motor NEMA17 MKS SERVO42 developed by Makerbase that prevents losing steps. CPU is STM32F1…
  ☆173Updated 3 years ago
• Smoothieware / Smoothieboard2
  Hardware files for the Smoothieboard v2, and extension boards
  ☆58Updated 11 months ago
• lucysrausch / ottercontrol
  Hardware files for OtterControl BLDC motor controller
  ☆65Updated 5 years ago
• kcjengr / probe_basic
  User interface for the LinuxCNC machine control.
  ☆109Updated this week
• Schildkroet / GRBL-Advanced
  Grbl-Advanced is a no-compromise, high performance, low cost alternative for CNC milling. This version of Grbl runs on a STM32F411RE / ST…
  ☆294Updated 10 months ago
• multigcs / riocore
  riocore
  ☆45Updated this week
• grblHAL / Simulator
  grblHAL drivers for simulation (Linux and Windows)
  ☆31Updated last week