Alternatives and similar repositories for CANnuccia

Users that are interested in CANnuccia are comparing it to the libraries listed below

• marcinbor85 / can-prog
  Command-line tool to flashing devices by CAN-BUS
  ☆83Updated 5 years ago
• jgressmann / supercan
  This is project SuperCAN. An open source USB to CAN-FD protocol.
  ☆86Updated 2 weeks ago
• matejx / usb2can
  USB to CAN with STM32F103
  ☆14Updated last year
• matejx / stm32f1-CAN-bootloader
  STM32F1 CAN bootloader
  ☆16Updated 5 years ago
• madprogrammer / stm32-can-bootloader
  STM32 CAN-bus bootloader
  ☆77Updated 8 years ago
• ryedwards / budgetcan-fw
  Firmware to support gs_usb on most STM32 devices
  ☆45Updated 4 months ago
• tuna-f1sh / entree
  Entree is a USB-C CAN interface with USB-PD - gets the CAN party started!
  ☆80Updated last year
• mach-systems / CANFD-LIN-Gateway
  An STM32CubeIDE project for the CAN-FD LIN Gateway device.
  ☆23Updated 2 years ago
• nxyd / libudslin
  Unified Diagnostic Services (ISO-14229) protocol on LIN
  ☆24Updated 3 years ago
• karlyamashita / CANable_USB_CAN
  Open source project that uses the CANable hardware from protofusion.org
  ☆39Updated 5 years ago
• IntergatedCircuits / CanDybugFW
  CAN bus gateway over USB
  ☆21Updated 3 years ago
• CYMOTIVE / CYMOCAN
  Low cost USB to CAN-FD (Controller Area Network - Flexible Data rate) interface.
  ☆18Updated 2 years ago
• DieBieEngineering / DieBieMS-Bootloader
  This is the bootloader firmware portion of my DieBieMS battery management system.
  ☆24Updated 6 years ago
• suburbanmarine / hadoucan-fw
  Firmware for SM-1301 USB-CAN FD adapter
  ☆26Updated 3 weeks ago
• RudolphRiedel / USB_CAN-FD
  This is an Open Source Hardware USB to CAN-FD Interface
  ☆68Updated 5 months ago
• rusoku / CANAL-View
  CANAL View Qt GUI for TouCAN USB to CAN bus converter
  ☆23Updated 2 years ago
• walmis / stm32-slcan
  slCAN compatible firmware for STM32f103C8T6
  ☆75Updated 3 years ago
• dweggg / inverter
  SiC dual 80kW (2x40kW), 600V, 3 phase traction inverter with FOC
  ☆28Updated 11 months ago
• vladisenko / USB-CAN
  Yet another USB-CAN adapter.
  ☆13Updated 3 years ago
• MPaulHolmes / AC-Controller
  This is the software for running an AC INDUCTION OR PERMANENT MAGNET motor with field oriented control.
  ☆52Updated 8 years ago
• krumboeck / usb2can_firmware
  ☆17Updated 9 years ago
• jsphuebner / inverter-hardware
  Eagle schematics of inverter main board, sensor boards and gate drivers
  ☆71Updated 3 years ago
• davefiddes / c2000-inverter
  Port of the Hubner Inverter to the TI C2000 architecture used by Tesla inverters.
  ☆16Updated 2 years ago
• jsphuebner / stm32-sine
  Main firmware of the Huebner inverter project
  ☆175Updated last month
• normaldotcom / candleLight_fw
  gs_usb compatible firmware for candleLight, cantact and canable
  ☆73Updated 4 years ago
• moonglow / kvaser_cantact
  Xvaser LL v2 firmware for CANtact ( CANable ) or any other similar boards.
  ☆47Updated 3 years ago
• SimonCahill / isotp-c
  An implementation of the ISO-TP (ISO15765-2) CAN protocol in C
  ☆36Updated 3 months ago
• WeActStudio / WeActStudio.USB2CANFDV1
  USB2CANFDV1, 1500V ISO, 5Mbps Max
  ☆52Updated last year
• as-boards / stm32f107vc
  ☆18Updated 6 years ago
• TheRo0T / CAN-USB-STM32
  ☆66Updated 9 years ago