Alternatives and similar repositories for Inkplate-GUI-Designer

Users that are interested in Inkplate-GUI-Designer are comparing it to the libraries listed below

• SolderedElectronics / Inkplate-micropython
  Micropython driver for Inkplate boards
  ☆79Updated 8 months ago
• gojimmypi / wolfssh
  wolfSSH is a small, fast, portable SSH implementation, including support for SCP and SFTP.
  ☆55Updated last week
• Jana-Marie / diyiji
  Open source slanted desktop audio-monitor stand
  ☆10Updated last year
• jimyuill / word-web-nav
  create usable MS-Word web-pages
  ☆14Updated last year
• boredom101 / dev-expansion-card
  Framework Laptop Expansion Card
  ☆26Updated 3 years ago
• drandyhaas / haasmesh
  Scripts and other files for the Haas Mesh OpenWRT system
  ☆34Updated 2 weeks ago
• ricardodeazambuja / RPI0_GPU_FFT
  Experiments using the RPI Zero GPU for FFT (1D and 2D)
  ☆35Updated 3 years ago
• SolderedElectronics / Inkplate-10-hardware
  Open Source Hardware (OSH) files for e-paper display Inkplate 10.
  ☆71Updated 3 years ago
• RbtsEvrwhr-Riley / CellSol
  CellSol: Long Range Solar Powered Communications Network
  ☆82Updated last year
• technoblogy / minimal-gif-decoder
  A GIF image decoder designed to allow GIF images to be read and displayed by a small microcontroller.
  ☆12Updated 2 years ago
• RobertElderSoftware / PatientTurtle
  ☆37Updated 5 years ago
• DarcyJProjects / touchtone555
  An open-source DIY, NE555-based analogue synthesizer - play notes with a stylus
  ☆17Updated last month
• soundslide / open
  SoundSlide Open Source
  ☆19Updated 3 weeks ago
• j-zero / orsala_hack
  Alternative firmware for IKEA ORSALA lamp
  ☆60Updated 4 years ago
• jp3141 / 60Hz
  Measure and record 60 Hz power line frequency using GPS 1 pps as a reference
  ☆23Updated 4 months ago
• Jana-Marie / philphoc-luma
  Zigbee/Hue to WS2812 or similar addressable LED bridge.
  ☆19Updated 2 years ago
• sequoia-hope / rpi-cm4-switch-board
  A Raspberry Pi (RPi) Compute Module 4 (CM4) Carrier Board with integrated gigabit switch
  ☆42Updated 3 years ago
• MakerM0 / PixelTime
  a low power led watch based on ESP32 C3 & MicroPython
  ☆11Updated last year
• wd5gnr / SerialMux
  Serial Multiplexer for Linux and Microcontrollers
  ☆24Updated 3 years ago
• Meshinger / Meshinger
  KiCad Project for the Meshinger hardware
  ☆11Updated 3 years ago
• Inne-Lemstra / soft_soldering_jig
  Circuit sculpture jig consisting of a vacuum pump attached to a silicone pad to keep rods and SMD components in place when soldering them…
  ☆19Updated 4 years ago
• suarezvictor / litex_imgui_usb_demo
  Soft USB for LiteX
  ☆50Updated 2 years ago
• geeksville / framework-portduino
  An Arduino API that sits on top of Linux and other operating systems. This lets you run Arduino code on Raspberry PI, desktops, etc... A…
  ☆49Updated last year
• amaranth-lang / template-fpga
  Template repository for getting started with general Amaranth FPGA projects
  ☆16Updated last year
• Breadstick-Innovations / M4-Breadstick
  A long and thin development board, designed to keep the number and length of jumper wires to a minimum. Runs Circuit Python on Microchip …
  ☆14Updated last year
• CRImier / KeyboardWhiz
  A laptop keyboard reverse-engineering helper
  ☆10Updated 3 years ago
• solderparty / keyboard_featherwing_hw
  ☆27Updated 3 years ago
• anfractuosity / usbmeter
  Simple program for extracting data from UM25C bluetooth power meter and for generating real-time voltage, current and power graphs
  ☆15Updated 4 years ago
• azzeloof / osj
  ☆9Updated 2 years ago
• drorgl / buildroot-tinyemu
  Buildroot configuration suitable for running under TinyEmu
  ☆29Updated 2 years ago