Alternatives and similar repositories for logic-ws2812

Users that are interested in logic-ws2812 are comparing it to the libraries listed below

• technoblogy / tiny-mega-i2c
  Minimal I2C master routines for the new AVR microcontrollers.
  ☆22Updated 3 years ago
• technoblogy / continuity-tester
  A simple continuity tester, based on an ATtiny85 and a piezo buzzer.
  ☆18Updated 7 years ago
• raquenaengineering / luisabel_serial_plotter
  Plotting tool based on the arduino plotter using python and Qt, with extended functionality.
  ☆35Updated last year
• adafruit / Adafruit_FreeTouch
  A QTouch-compatible library
  ☆44Updated last year
• sumotoy / gpio_expander
  A library for drive a lot of GPIO chips with Arduino/Teensy3.x or LC
  ☆71Updated 5 years ago
• Miceuz / triac-bloc
  An universal power block based on triac. In essence this is a solid state relay with some bells and whistles
  ☆50Updated 5 years ago
• sgreg / 4chord-midi
  The 4chord USB MIDI Keyboard
  ☆36Updated 7 months ago
• PaulStoffregen / FreqMeasureMulti
  Measures the elapsed time during each cycle of up to 8 input frequencies.
  ☆35Updated 4 years ago
• mike-rankin / SAMD21G18A_Sensor_Board_with_Color_Oled
  SAMD21G18A Sensor Board with Color Oled
  ☆10Updated 7 years ago
• trueserve / reflowOvenController
  Reflow Oven Controller. true_oven devel branch progress: vertical LCD, 60Hz mains, faster LCD, bug fixes, works with Arduino Nano / Mini …
  ☆14Updated 10 years ago
• dasaki / nanoReflowController
  Reflow Oven Controller. See below for more information.
  ☆79Updated 5 years ago
• RaD / SolderPaste14M2
  Solder Paste Dispenser
  ☆18Updated 10 years ago
• martonmiklos / EAGLE-libraries
  Collection of my libraries for the Autodesk EAGLE CAD tool
  ☆22Updated 3 years ago
• dining-philosopher / litefeeder
  Semi-automatic passive printable/castable feeder for LitePlacer
  ☆59Updated 5 years ago
• mike-rankin / SAMD21G18A_Sensor_Board
  SAMD21G18A Sensor Board
  ☆15Updated 8 years ago
• septillion-git / QC2Control
  Set the voltage of a Quick Charge 2.0 source via the Arduino.
  ☆68Updated 7 years ago
• Fattoresaimon / i2cencoder
  Documentation, source code and examples about the I2C Encoder project
  ☆42Updated 6 years ago
• wagiminator / ATtiny84-TinyCalibrator
  OSC Calibrator and High-Voltage Fuse Resetter for 8-Pin ATtinys
  ☆55Updated 2 years ago
• adafruit / Adafruit_ZeroI2S
  I2S audio playback library for the Arduino Zero / Adafruit Feather M0 (SAMD21 processor).
  ☆33Updated 2 years ago
• bertrik / ElectronicLoad
  Arduino software for an electronically controlled load, based on a STM32 microcontroller
  ☆21Updated 4 years ago
• adafruit / Standalone-Arduino-AVR-ISP-programmer
  A standalone programmer for mass-programming AVR chips
  ☆86Updated 4 years ago
• GravCorp / DayOLED_SSD1306
  A library for the Arduino Due, for using SSD1306 OLED screens, with DMA for high speed.
  ☆40Updated 10 years ago
• lhartmann / esp8266_reprap
  ESP8266-based I2S-output WS2812(B) Driver
  ☆51Updated 9 years ago
• maximus64 / sd_rgb500_cfw
  Custom Firmware for SD-RGB500 Laser Projector
  ☆37Updated 2 years ago
• pkarsy / rcCalibrator
  Calibration of the internal RC oscillator of atmega328p chip, and UART bootloader(ATmegaBOOT) without crystal.
  ☆21Updated last year
• mattairtech / ArduinoCore-samd
  This is a fork from arduino/ArduinoCore-samd on GitHub. This will be used to maintain Arduino support for SAM D|L|C (M0+ and M4F) boards …
  ☆107Updated last year
• fugalster / Smart-BLDC-Commutator-Hardware
  ☆16Updated 10 years ago
• cpldcpu / TinyTouchButton
  A touch controlled light with 4xWS2812 RGB LEDs and ATtiny 10
  ☆34Updated 6 years ago
• whatnick / ATM90E26_Breakout
  Breakout Board for ATMEL M90E26 single phase energy monitor
  ☆15Updated 7 years ago
• bitbank2 / oled_turbo
  An experiment to push the limits of the SSD1306 through bit banging on Arduinos
  ☆47Updated 5 years ago