Alternatives and similar repositories for vedirect:

Users that are interested in vedirect are comparing it to the libraries listed below

• njfaria / dalylog
  Daly bms logger. For logging data to your local server per MQTT.
  ☆25Updated 3 years ago
• softwarecrash / Victron2MQTT
  Little Program for ESP82XX to get the Victron data to web and MQTT
  ☆57Updated last week
• ned-kelly / docker-epever-homeassistant
  A Docker based Home Assistant interface via MQTT for the EPEver MPPT Charge Controllers
  ☆19Updated 4 years ago
• victronenergy / dbus-mqtt
  Venus OS service mapping the D-Bus on Venus OS to MQTT
  ☆113Updated 8 months ago
• victronenergy / venus-docker
  ☆29Updated 3 weeks ago
• sw-home / FHEM-BluetoothSmartBMS
  Get readings from the Bluetooth Smart BMS from https://www.lithiumbatterypcb.com/ in FHEM
  ☆14Updated 3 years ago
• birdie1 / victron
  Victron bluetooth and serial communication at a python script. With MQTT and HomeAssistant support.
  ☆126Updated last year
• victronenergy / venus-docker-grafana
  ☆112Updated 8 months ago
• weigu1 / SmartyReader
  ☆13Updated last year
• syssi / esphome-pace-bms
  ESPHome component to monitor and control a PACE Battery Management System (PACE-BMS) via RS485 (Modbus)
  ☆40Updated 3 weeks ago
• keshavdv / victron-ble
  A Python API to parse Victron Instant Readout BLE advertisements
  ☆111Updated 3 months ago
• ClassicDIY / PylonToMQTT
  Reads data from the Sage BMS console port and publishes to MQTT
  ☆24Updated this week
• nmakel / solaredge_meterproxy
  Modbus proxy for SolarEdge inverters and unsupported kWh meters
  ☆32Updated 8 months ago
• tgalarneau / bms
  JBD BMS and Thornwave bluetooth data monitoring
  ☆44Updated 2 years ago
• glitterkitty / EpEverSolarMonitor
  Use an ESP8266 to read live-, statistical- and status-data from an EpEver LandStar (LS1024B) via Modbus and publish using MQTT
  ☆33Updated 6 years ago
• diebietse / invertergui
  A simple Go based monitoring tool for Victron Multiplus devices
  ☆42Updated 5 months ago
• victronenergy / dbus_modbustcp
  Modbustcp server, that allows for example PLCs to get data from the D-Bus.
  ☆40Updated last month
• RalfZim / venus.dbus-fronius-smartmeter
  A service for Venus OS, reading smart meter data from a Fronius system and making the values available on dbus.
  ☆54Updated 5 months ago
• Andre-Schuiki / esphome_im350
  ☆14Updated last year
• jessedc / ve.direct-python
  VE.Direct to InfluxDB for Raspberry Pi
  ☆27Updated 5 years ago
• shining-man / bsc_hw
  Hardware battery safety controller (BSC)
  ☆26Updated 9 months ago
• spacemanspiff2007 / sml2mqtt
  Sml to MQTT Bridge
  ☆31Updated last month
• karioja / vedirect
  Simple VE.Direct reader for Python
  ☆97Updated 4 years ago
• Marv2190 / venus.dbus-MqttToGridMeter
  A service for Venus OS, reading smart meter data from a Fronius system and making the values available on dbus.
  ☆22Updated 7 months ago
• Anamico / node-red-contrib-alarm
  Nodes to build your own home alarm system. Designed to work easily with (but does not require) homekit.
  ☆24Updated 2 years ago
• freakent / dbus-mqtt-devices
  A driver for Victron VenusOS GX devices to support use of dbus-mqtt/flashmq-mqtt
  ☆125Updated last month
• victronenergy / gui-v2
  ☆34Updated this week
• tobiasfaust / SolaxModbusGateway
  Modbus RTU to MQTT Gateway
  ☆75Updated this week
• victronenergy / node-red-contrib-victron
  ☆103Updated this week
• byte4geek / SEPLOS_MQTT
  Read data From Seplos BMS and send them to the Home Assistant
  ☆42Updated last year