OpenSourceEBike / EBike_EScooter_modular_DIY
EBike / EScooter app developed in CircuitPython, to control a motor by sending commands to VESC motor controller
☆62Updated last week
Alternatives and similar repositories for EBike_EScooter_modular_DIY:
Users that are interested in EBike_EScooter_modular_DIY are comparing it to the libraries listed below
- ☆28Updated last year
- The source code for the VESC Express☆50Updated last week
- EV motor controller with space to have customizable electronics and be easy to repair and build.☆36Updated 2 years ago
- M365_MC_WB☆131Updated last year
- Multi-Platform, Modular, Powerful ESC☆103Updated last year
- ☆79Updated 9 months ago
- A minimal raspberry pi 3 or 4 image that runs VESC Tool☆29Updated 3 years ago
- ☆63Updated 3 years ago
- Firmware for Roxie, a device for electric vehicles that displays data read from VESC based speed controllers.☆20Updated 3 years ago
- ARCHIVE: Lebowski controller IC 2.A1 source code and (short) explanation☆18Updated 5 years ago
- BLE-UART bridge for the VESC with packet handling and VESC Tool compatibility☆58Updated 7 months ago
- BLE-UART bridge for the VESC with packet handling and VESC Tool compatibility.☆38Updated last year
- Motor control firmware implementing FOC for STM32F103☆40Updated 3 years ago
- Arduino-compatible library for battery management system based on Texas Instruments bq769x0 analog frontend (bq76920, bq76930 and bq76940…☆44Updated last month
- Free FOC firmware for Lishui E-Bike-Controllers☆169Updated this week
- CAN_Interface for ESP32 (Cannelloni Protocol)☆53Updated 4 years ago
- ☆28Updated 10 months ago
- S06S 250W Torque Simulation Sine Wave Controller☆14Updated 7 years ago
- Bridge between Wifi and CAN. Minimal variant of the ESP32RET. Using ESP32s3☆27Updated 6 months ago
- Read data from VESC6 and display on and LCD screen. Here for more info: https://youtu.be/7jBlKI7aqZA☆22Updated 5 years ago
- Dashboard for VESC based ESC built on TTGO T-Display☆12Updated last year
- A simple Arduino sketch that allows you to send data to Torque Pro for Android☆22Updated 3 years ago
- UCAN is an open source USB-to-CAN interface board, based on STM32F072 and candleLight open source firmware, and supports linux/win/mac mu…☆27Updated last year
- ☆19Updated 2 years ago
- ☆12Updated 2 years ago
- BLDC Motor Controller based on the VESC 4.12 hardware☆74Updated 4 years ago
- With Field Oriented Control (FOC)☆16Updated 4 years ago
- Add Bluetooth to your Vesc Controller for under 3€☆21Updated last year
- MESC, Molony ESC, STM32F303 based FOC+BLDC ready, HALL, Encoder, Sensorless, single sides, 2 layer, ~90A @48V☆44Updated 4 years ago
- Open source logic board to control the Toyota Prius Gen 3 Inverter☆46Updated 3 years ago