FYSETC / UCANLinks
UCAN is an open source USB-to-CAN interface board, based on STM32F072 and candleLight open source firmware, and supports linux/win/mac multi-platform.
☆31Updated 2 years ago
Alternatives and similar repositories for UCAN
Users that are interested in UCAN are comparing it to the libraries listed below
Sorting:
- ☆29Updated 9 months ago
- ☆59Updated 7 months ago
- There are now, a total of 81 hardware electronics on this catalogue for Smart Devices, A.I. enabled. Designed in Kicad, and ready to dow…☆91Updated 10 months ago
- DIY Electronic load for DCDC converter characterization☆50Updated 4 years ago
- Monitor Canbus traffic☆128Updated 2 months ago
- ESP32 based CAN development board☆175Updated 3 years ago
- Custom Turbo Boost Gauge using ESP32S3 with Round Waveshare IPS Display☆115Updated last year
- Firmware for the cheapest can sniffer☆37Updated last year
- ☆42Updated 5 years ago
- CAN_Interface for ESP32 (Cannelloni Protocol)☆56Updated 4 years ago
- DIY Reflow Oven, mcu: STM32F103 dev board, Display: Nextion Basic 3.5", PID controller.☆37Updated 3 years ago
- Reflow controller with ESP32 and TFT LCD on board.☆68Updated last month
- Motorized solder paste dispenser☆27Updated 2 years ago
- 2.5kV USB 2.0 Isolator with 200mA Power Supply and Full Speed (12Mbps) Support☆62Updated 2 years ago
- 12V Automatic UPS system☆43Updated 4 years ago
- Decode tire pressure monitoring system TPMS BLE 433MHz CC1101 ESP8266 ESP32☆94Updated 2 years ago
- Extend the possibilities of cheap digital power supplies with a WiFi module☆59Updated last year
- USB2CANFDV1, 1500V ISO, 5Mbps Max☆52Updated last year
- ESP3D Firmware for ESP32 based TFT☆46Updated 3 months ago
- Arduino Library and code to flash CC2510, CC1110 or other Texas Instruments CCxxx Microcontroller☆71Updated 3 years ago
- ESP8266 reflow controller☆24Updated 2 years ago
- Generates TRIAC control pulse for soft start of motors used in circular saw and other DIY tools.☆22Updated last year
- ☆72Updated 3 years ago
- SMBUS analyzer tool using an Arduino Pro Mini for Smart Batteries that use the Smart Battery System Specification.☆30Updated 6 years ago
- Custom firmware for cheap STC Based Soldering iron using PlatformIO and SDCC 8051 based☆50Updated 2 years ago
- Isolated current, voltage and SOC monitor for battery banks up to 85V☆54Updated 2 years ago
- ☆139Updated 2 years ago
- ☆24Updated 6 months ago
- Car Dashboard using Arduino Leonardo, OBDII to UART adapter and Intelligent Nextion Display☆32Updated 9 months ago
- A ESP32 based interface between CAN-bus and IoT environments.☆41Updated 2 years ago