OpenGammaProject / MicroFC-SiPM-Carrier-BoardLinks
🎒 Carrier board for a 6 mm C-Series MicroFC-60035 silicon photomultiplier.
☆16Updated this week
Alternatives and similar repositories for MicroFC-SiPM-Carrier-Board
Users that are interested in MicroFC-SiPM-Carrier-Board are comparing it to the libraries listed below
Sorting:
- ☢️#️⃣ Hardware for quick and easy prototyping with your silicon photomultiplier and even building a simple scintillation counter.☆27Updated this week
- A 0.01Hz-1+MHz low noise amplifier☆21Updated last year
- Low-noise oscilloscope power rail probe☆77Updated 9 months ago
- ☢️📊 Progressive Web App MCA for gamma spectroscopy including file and live plot support via a serial interface.☆45Updated this week
- ☢️👁️ Hardware for a hackable DIY gamma-ray spectrometer using a popular NaI(Tl) scintillator, SiPM and a Raspberry Pi Pico.☆302Updated this week
- 4 port eCal module☆94Updated 3 weeks ago
- 1MHz to 6GHz USB based vector network analyzer☆144Updated 4 years ago
- Multichannel Analyser MCA for Gamma spectrometry☆24Updated last month
- 2GHz single-ended active probe design☆132Updated 11 months ago
- High-level python interface to OpenEMS with automatic mesh generation☆88Updated 11 months ago
- Photodiode transimpedance amplifier, on a one inch diameter circular PCB☆17Updated last year
- A tiny 1.3 GHz FET Probe☆31Updated 2 years ago
- ☆14Updated 3 months ago
- Development of an SMA coaxial to microstrip transition using open source software (openEMS)☆36Updated last year
- This is a open source hardware (and software) RF Signal Generator using readily available off the shelf-components.☆11Updated 5 years ago
- A spiral inductor footprint generator for Kicad☆54Updated 4 years ago
- A Python wrapper to the OpenEMS FDTD solver with Kicad footprint generation☆86Updated last year
- Under development open hardware microwave vector network analyzer☆194Updated last year
- ☆75Updated last month
- Prototype time domain reflectometer/sampling oscilloscope☆51Updated 6 years ago
- Experiments with ESPROS epc901 1024x1 CCD line sensor, including a spectroscope.☆55Updated 2 years ago
- A simple and low cost particle detector for teaching☆77Updated 10 months ago
- 3D printed laser scanning microscope from CD/DVD/Blu-ray pickup☆87Updated last month
- Simple breakout board for ISC0901B0 sensor☆15Updated 3 years ago
- Vector Network Analyzer based on the STM32F103C8T6 bluepill☆85Updated 4 years ago
- It started as some general experiments with RF stuff and gradually evolved into a (severely limited) spectrum analyzer.☆42Updated 6 years ago
- Files for an avalanche Laser diode driver☆18Updated 8 months ago
- DIY source-measure unit☆160Updated 3 years ago
- RF electronics engineering ecosystem☆29Updated 3 years ago
- ☆10Updated 2 months ago