Alternatives and similar repositories for EIT_Firmware

Users that are interested in EIT_Firmware are comparing it to the libraries listed below

• OpenEIT / EIT_EE
  Electrical Impedance Tomography PCB design
  ☆91Updated 4 years ago
• OpenEIT / OpenEIT
  Python based dashboard for real-time Electrical Impedance Tomography including image reconstruction using Back Projection, Graz Consensus…
  ☆253Updated 5 months ago
• peterisza / mobilecg
  ☆66Updated 4 years ago
• kelu124 / un0rick
  smallish ice40 / raspberrypi ultrasound hardware
  ☆155Updated last month
• geekysuavo / pyppm
  Open source Earth's Field NMR Spectrometer
  ☆66Updated 4 years ago
• apertus-open-source-cinema / beta-hardware
  AXIOM Beta Hardware
  ☆62Updated 5 years ago
• mwelling / beagle-wire
  ICE40 FPGA Cape for Beaglebone
  ☆52Updated 5 years ago
• OpenElectronicsLab / OpenHardwareExG
  The OpenHardwareExG is a platform for ECG, EEG, EMG, ENG, EOG, and evoked potential applications. http://openelectronicslab.github.io/Op…
  ☆96Updated 4 years ago
• astuder / epc901
  Experiments with ESPROS epc901 1024x1 CCD line sensor, including a spectroscope.
  ☆56Updated 2 years ago
• tricorderproject / openct2
  ☆47Updated 9 years ago
• betrusted-io / betrusted-hardware
  Hardware design files for Betrusted
  ☆79Updated 3 years ago
• opensensinglab / magneticimager
  A magnetic imaging tile constructed from an array of Hall Effect sensors
  ☆57Updated 6 years ago
• google / prudaq
  PRUDAQ is an open source 40MSPS (megasamples per second) Data Acquisition board for the Beaglebone Black/Green
  ☆123Updated 9 years ago
• wlmeng11 / SimpleRick
  🙌 Low-cost 2D ultrasound imaging hardware for makers
  ☆39Updated 7 years ago
• xecus / opensource-mri-project
  ☆49Updated 5 years ago
• nmz787 / open-spectrometer
  A repository for code, mechanical designs, and electronic plans related to the OpenSpectrometer project.
  ☆37Updated 11 years ago
• CarlosGS / Open-Radiation-Detector
  Portable radiation detector based on an ionization chamber
  ☆62Updated last year
• tvelliott / jPCBSim
  Front-end and post processing software for simulating planar RF filters and antennas with the openEMS FDTD field solver.
  ☆27Updated 7 years ago
• cnlohr / fx3fun
  Treat your Cypress FX3 a little like a logic analyzer or software defined bus.
  ☆165Updated 4 years ago
• devbisme / CAT-Board
  The CAT Board is a Raspberry Pi HAT with a Lattice iCE40HX FPGA.
  ☆61Updated last year
• bqlabs / icestudio
  Experimental graphic editor for open FPGAs.
  ☆50Updated 9 years ago
• swharden / diyECG-1opAmp
  A surprisingly good ECG circuit using a single op-amp and some Python software
  ☆108Updated 4 years ago
• OSHChip / OSHChip_V1.0_Docs
  Schematics, Gerbers, Bill of materials
  ☆35Updated 10 years ago
• erichVK5 / translate2geda
  A utility for converting kicad (.mod, .lib), Eagle (.lbr), gerber (.gbr etc..), BXL (.bxl), IBIS (.ibs), symdef, LT-Spice (.asc), QUCS (.…
  ☆50Updated 2 years ago
• krtkl / open-source-schematics
  released krtkl schematics
  ☆57Updated 7 years ago
• OpticsBench / laser-cut-optics-bench
  Easy to make optics bench using a laser cutter
  ☆26Updated 9 years ago
• flatCat1597 / ramanSpectrometer
  ramanPi - the DIY 3D Printable Raman Spectrometer
  ☆109Updated 8 years ago
• n8vi / pru-dds
  Highly configurable Beaglebone PRU-based DDS
  ☆37Updated 8 years ago
• timvideos / HDMI2USB-numato-opsis-hardware
  The Numato Opsis board is the first fully open source HDMI2USB board.
  ☆116Updated 7 years ago
• lucysrausch / pcbtc
  PCB based Dual Resonance Solid State Tesla Coil Design
  ☆220Updated 2 years ago