MichielVanwelsenaere / HomeAutomation.CoDeSys3Links
Home Automation system build in CoDeSys 3 with MQTT communication to any third party Home Automation software
☆126Updated last month
Alternatives and similar repositories for HomeAutomation.CoDeSys3
Users that are interested in HomeAutomation.CoDeSys3 are comparing it to the libraries listed below
Sorting:
- Modbus master which publishes via MQTT☆66Updated last week
- MQTT client library for CODESYS, supporting all QoS☆126Updated last year
- XKNX - A KNX library written in Python☆310Updated this week
- Modbus TCP <-> MQTT glue. YAML configuration. Robust.☆86Updated last year
- Modbus master which publishes via MQTT☆129Updated last year
- This repository contains official Wago firmware releases for 750-8xxx(PFC) series.☆48Updated 3 months ago
- ModBus Measurement Daemon - simple reading of data from ModBus meters and grid inverters☆266Updated last month
- Arduino-based Modbus RTU to Modbus TCP/UDP gateway with web interface. Allows you to connect Modbus RTU slaves (such as sensors, energy m…☆193Updated 4 months ago
- Control your KNX intallation via Node-Red! A bunch of KNX nodes, with integrated Philips HUE control and ETS group address importer.☆163Updated last week
- OpenSource KNX software and hardware for maker, hobbyist and home automation enthusiasts☆79Updated 3 weeks ago
- Connect multiple clients to modbus devices☆94Updated 2 months ago
- A Codesys MQTT library☆13Updated 7 years ago
- Repository for Bepacom EcoPanel add-ons for Home Assistant.☆21Updated 3 months ago
- knx stack (TP, IP and RF) for arduino and linux, Can be configured with ETS☆308Updated 2 weeks ago
- Sungrow & SMA Solar Inverter addon for Home Assistant using mobusTCP☆74Updated last year
- ETS project parser written in python☆99Updated this week
- SolarEdge Modbus data collection library☆159Updated 6 months ago
- A Codesys MQTT library☆37Updated 6 years ago
- script to convert ETS5 project file to a YAML configuration file suitable for Home Assistant☆57Updated 5 months ago
- Simple Gui to create simple knxprod file for ETS.☆60Updated 3 years ago
- This is the library of the KNX-User-Forum Arduino project initiated by thorsten Gehrig☆54Updated 2 months ago
- DALI <-> MQTT bridge☆49Updated last year
- Monitor and control Daikin/Rotex Altherma heat pumps from Home Assistant directly via the 2-wire P1/P2 thermostat interface. Also enables…☆384Updated last week
- A node-red PID loop controller node intended for the control of real world processes☆27Updated last year
- KNXnet/IP server for KNX IP, KNX (RF) USB, FT1.2, and TP-UART☆65Updated 2 weeks ago
- opcua custom component for home assistant☆11Updated 4 years ago
- Venus OS service mapping the D-Bus on Venus OS to MQTT☆115Updated last year
- A KNX/IP library for the ESP8266 with Arduino☆142Updated 3 years ago
- maintained by PLUS for Node-RED - https://plus4nodered.com☆322Updated last week
- ☆40Updated 5 months ago