Alternatives and similar repositories for hacore_opcua

Users that are interested in hacore_opcua are comparing it to the libraries listed below

• bartbutenaers / node-red-contrib-ui-multistate-switch
  A Node Red node to show a switch with multiple states in the Node-RED dashboard
  ☆16Updated last year
• tjhowse / modbus4mqtt
  Modbus TCP <-> MQTT glue. YAML configuration. Robust.
  ☆90Updated last month
• MichielVanwelsenaere / HomeAutomation.CoDeSys3
  Home Automation system build in CoDeSys 3 with MQTT communication to any third party Home Automation software
  ☆138Updated 4 months ago
• markusressel / openhasp-config-manager
  A tool to manage all of your openHASP device configs in a centralized place.
  ☆16Updated 2 weeks ago
• colinl / node-red-contrib-pid
  A node-red PID loop controller node intended for the control of real world processes
  ☆28Updated last year
• gonium / gosdm630
  An interface for the Eastron SDM/Modbus smart meter series.
  ☆74Updated 6 years ago
• jamesturton / shelly-dimmer-stm32
  Open-source firmware for STM32 co-processor on the Shelly Dimmer.
  ☆55Updated 2 years ago
• dev-lab / esp-iot-mbus
  M-Bus gateway with web server based on ESP8266 NodeMCU
  ☆27Updated 7 months ago
• andrethomas / TasmotaClient
  TasmotaSlave Library and interface examples
  ☆14Updated 5 years ago
• GuillermoElectrico / modbus-logger
  ☆15Updated 7 months ago
• plapointe6 / CustomHADevicesCollection
  A collection of custom Home Assistant devices working with arduino/MQTT
  ☆10Updated 5 years ago
• phpcoder / tasmota-nexus-mqtt
  A custom extension for Tasmota firmware to build a gateway capable of receiving 433 MHz wireless temperature-humidity sensor data and sen…
  ☆12Updated last year
• BiancoRoyal / node-red-contrib-bacnet
  maintained by PLUS for Node-RED - https://plus4nodered.com
  ☆27Updated last year
• budulinek / arduino-modbus-rtu-tcp-gateway
  Arduino-based Modbus RTU to Modbus TCP/UDP gateway with web interface. Allows you to connect Modbus RTU slaves (such as sensors, energy m…
  ☆200Updated 8 months ago
• lovejoy777 / NSpanel
  Custom Firmware for the Sonoff NSpanel (EU) version.
  ☆22Updated 3 years ago
• openenergymonitor / HeatpumpMonitor
  Open-source Heatpump Monitor
  ☆78Updated last year
• plapointe6 / HAMqttDevice
  A library that provides tools to simplify MQTT discovery implementation for Home Assistant to your device.
  ☆47Updated last year
• codm / cc2652p2-tcp-zigbee
  ZigBee CC2652P2 Ethernet Coordinator
  ☆33Updated last month
• soif / EspBuddy
  Wrapper to easily upload (OTA or Serial), backup, batch query, monitor ESP8266 boards using Esptool.py, Espota.py and Platformio
  ☆51Updated 10 months ago
• pakerfeldt / knx-mqtt-bridge
  ☆40Updated 3 weeks ago
• Supergiovane / node-red-contrib-hikvision-ultimate
  A native set of node for Hikvision Cameras, Doorbells, Alarms, Radars etc.
  ☆59Updated this week
• marcin1j / esp8266-modbus-gateway
  ESP8266 Modbus TCP to RTU gateway
  ☆19Updated 5 years ago
• nmakel / solaredge_meterproxy
  Modbus proxy for SolarEdge inverters and unsupported kWh meters
  ☆35Updated last year
• koenvervloesem / Getting-Started-with-ESPHome
  Code examples, errata and additional tips and references to interesting projects for the book "Getting Started with ESPHome: Develop your…
  ☆56Updated 2 years ago
• boneskull / node-red-contrib-homekit
  Node-RED nodes to simulate Apple HomeKit devices.
  ☆11Updated 7 years ago
• timroemisch / mqtt-s7-connector
  Connect Siemens S7 to Mqtt with Homeassistant discovery support
  ☆23Updated 2 years ago
• thorsten-gehrig / KnxTpUart
  This is the library of the KNX-User-Forum Arduino project initiated by thorsten Gehrig
  ☆58Updated 6 months ago
• envy / esp-knx-ip
  A KNX/IP library for the ESP8266 with Arduino
  ☆145Updated 3 years ago
• shining-man / bsc_hw
  Hardware battery safety controller (BSC)
  ☆29Updated last year
• volkszaehler / mbmd
  ModBus Measurement Daemon - simple reading of data from ModBus meters and grid inverters
  ☆272Updated 4 months ago