Alternatives and similar repositories for framework_logic_analyzer:

Users that are interested in framework_logic_analyzer are comparing it to the libraries listed below

• the6p4c / pawpad
  a (WIP) paw-shaped pogo pin connector
  ☆58Updated 2 years ago
• farpatch / farpatch
  Farpatch debugger software layer, backed by Black Magic
  ☆47Updated 2 weeks ago
• CGrassin / kicad-auto-silkscreen
  This KiCad plugin automatically calculate the optimal silkscreen placement of reference designators.
  ☆21Updated last year
• Jana-Marie / CH330_Hardware
  CH330 breakout board
  ☆26Updated 2 years ago
• jaydcarlson / py32-template
  ☆77Updated 7 months ago
• gregdavill / KiZip
  KiCad Plugin to package gerbers ready for ordering
  ☆36Updated 2 years ago
• alvarop / debugotron
  ☆48Updated last year
• Ralim / usb-pd
  USB-PD driver stack for the FUSB302
  ☆131Updated last year
• Tengo10 / pinout-overview
  A simple Python tool to create pinout overviews of ICs.
  ☆31Updated 11 months ago
• testudor / modular-breadboard-base
  Breadboard base with attachment slots for various modules
  ☆36Updated last year
• gsuberland / github_kicad_footprint_preview_tampermonkey
  Userscript for Tampermonkey that shows graphical previews of KiCad footprints on GitHub.
  ☆45Updated 3 years ago
• Jana-Marie / analog-toolkit
  A smol and simple STM32G431 based Analog to USB toolkit.
  ☆64Updated 6 months ago
• carrotIndustries / svdregview
  Point-and click access to MCU peripheral registers
  ☆22Updated 2 years ago
• majbthrd / DapperMime
  CMSIS-DAP using TinyUSB
  ☆121Updated 2 years ago
• colinoflynn / MeatBagPnP
  Scans barcodes on part bag, and tells you where to place part on PCB. Helps you (the meatbag) become a pick-n-place.
  ☆75Updated 3 years ago
• notro / pico-usb-io-board
  Raspberry Pi Pico USB I/O Board
  ☆72Updated last year
• lucysrausch / jlcsmt-kicad-converter
  Converts kicad .csv BOM files to JLCSMT compatible BOM format.
  ☆51Updated 5 years ago
• 0xjmux / ESP-PROG-Adapter
  Adapter PCB and Kicad Library to make adding component-less program and debug footprints to your PCBs as easy as possible
  ☆41Updated 9 months ago
• G33KatWork / RP1-Reverse-Engineering
  Experiments on the RP1
  ☆60Updated last year
• Jana-Marie / temperature-logger
  Anotter USB temperature logger that can record up to four channels with thermocouple or NTCs connected via CDC directly or SCPI to USB.
  ☆60Updated last year
• debug-edge / DebugEdge
  A small bridge to link a SWD programmer to an AVX Open Ended Card Edge connector.
  ☆42Updated 4 years ago
• aappleby / picorvd
  GDB-compatible RISC-V Debugger for CH32V003 that runs on a Raspberry Pi Pico
  ☆196Updated 9 months ago
• HarveyBates / kandle
  A CLI that automatically imports external components into a KiCad project.
  ☆32Updated 9 months ago
• mwelling / rp2040-pmod
  RP2040 MCU based PMOD
  ☆20Updated 2 months ago
• benedekkupper / stm32-i2c-hid
  HID over I2C demonstration
  ☆40Updated 5 months ago
• DurandA / reflow946
  Bluetooth LE temperature controller for the 946C electronic hot plate
  ☆103Updated 8 months ago
• minoseigenheer / SWD-over-USB-C
  Use SWD debugging over USB-C debug accessory mode
  ☆34Updated last year
• Janky-Jingle-Crew / NorthPoleCircuit
  2024 christmas card "North Pole Circuit"
  ☆37Updated last month
• CGrassin / kicad-pinout-generator
  This KiCad plugin generates pinouts from the PCB file to various formats.
  ☆36Updated 6 months ago
• tinfever / KiCAD-Custom-DRC-Rules-for-JLCPCB-with-Unit-Tests
  Comprehensive KiCAD Custom Rules for JLCPCB 4-layer service. Including PASS/FAIL test PCB examples for each rule.
  ☆26Updated last year