Alternatives and similar repositories for picoprobe-pcb

Users that are interested in picoprobe-pcb are comparing it to the libraries listed below

• gamblor21 / rp2040-logic-analyzer
  Using a RP2040 Pico as a basic logic analyzer, exporting CSV data to read in sigrok / Pulseview
  ☆91Updated 4 years ago
• tjko / tiny-picoprobe
  Tiny PicoProbe PCB
  ☆21Updated 2 years ago
• jaydcarlson / py32-template
  ☆83Updated last year
• rgrr / yapicoprobe
  Yet Another Picoprobe
  ☆164Updated 6 months ago
• essele / pico_debug
  A fast flasher/debugger for RP2040 based devices (runs on Raspberry Pi Pico)
  ☆78Updated last year
• jjsch-dev / pico_i2c_sniffer
  i2c sniffer with a Raspberry Pi Pico
  ☆86Updated 4 years ago
• ShawnHymel / rpi-pico-debugger-shoe
  ☆80Updated 4 years ago
• stevenj / GenPinoutSVG
  Generate Pinout Datasheet in SVG format, from a CSV source file of pin defintions
  ☆68Updated 2 years ago
• wuxx / nanoCH32V003
  ☆81Updated 3 months ago
• rhulme / pico-flashloader
  Small (<4k) flashloader for the RP2040 to allow a power-fail safe update in situations where the built-in bootloader is not suitable.
  ☆85Updated 7 months ago
• essele / kicad_jlcpcba
  KiCad pluging to create BOM and Placement files for JLCPCB's PCBA service
  ☆18Updated 4 years ago
• lucysrausch / jlcsmt-kicad-converter
  Converts kicad .csv BOM files to JLCSMT compatible BOM format.
  ☆51Updated 5 years ago
• gregdavill / KiZip
  KiCad Plugin to package gerbers ready for ordering
  ☆36Updated 3 years ago
• 8086net / pico-sexa-uart-bridge
  Raspberry Pi Pico UART-USB-I2C bridge (USB to six UARTs and one I2C)
  ☆62Updated 5 months ago
• benedekkupper / stm32-i2c-hid
  HID over I2C demonstration
  ☆43Updated last year
• xyphro / I3CBlaster
  Raspberry pico / RP2040 based USB to I3C converter with Python support
  ☆70Updated 3 weeks ago
• Wiznet / Hardware-Files-of-WIZnet
  This repository is a place to manage hardware-related data created by WIZnet.
  ☆66Updated last month
• zapta / pio_tft
  A library to interface a TFT to a Pico RP2040 using PIO and a parallel data path.
  ☆43Updated 4 years ago
• wagiminator / MCU-Flash-Tools
  Simple ISP Flash Tools for various Microcontrollers
  ☆97Updated 4 months ago
• JoanTheSpark / KiCAD
  all things relevant to KiCAD
  ☆43Updated 8 years ago
• tuupola / hagl_pico_mipi
  Raspberry Pi Pico MIPI DCS absraction layer for the HAGL graphics library
  ☆59Updated 5 months ago
• solderparty / rp2040_stamp_carrier_hw
  ☆17Updated 3 years ago
• majbthrd / SAMDx1-USB-DFU-Bootloader
  1kByte USB DFU Bootloader for SAMD11 / SAMD21
  ☆99Updated last year
• Anobium / PICKitPlus
  This is the PICkitPlus device database repository. This is the device database used by PICkitPlus for the PICkit 2 and PICkit 3 program…
  ☆55Updated this week
• ArcaneNibble / wch-uf2
  CH32V UF2 bootloader
  ☆51Updated last year
• jamesbowman / i2cdriver
  I2CDriver open source tools
  ☆207Updated last week
• Wiznet / RP2040-HAT-C
  Ethernet Example for RP2040
  ☆69Updated last year
• NathanY3G / rp2040-pio-emulator
  RP2040/RP2350 emulator for the testing and debugging of PIO programs
  ☆63Updated last month
• openscopeproject / HP34401a-OLED-FW
  HP34401a DMM OLED display mod firmware
  ☆57Updated 3 months ago
• devbisme / WireIt
  KiCad PCBNEW plugin that lets you add wires between pads on a PCB, delete them, and swap wires between pads.
  ☆86Updated 6 months ago