Alternatives and similar repositories for OpenSourceLogger

Users that are interested in OpenSourceLogger are comparing it to the libraries listed below

• karlyamashita / CAN-X
  CAN bus analyzer software
  ☆26Updated 2 years ago
• DanielMartensson / GoobySoft
  General software for logging and controlling devices. Controlling Modbus, CAN bus via STM32PLC etc
  ☆34Updated last month
• open-LIN / open-LIN-c
  Implementation of Local interconnect network in c
  ☆75Updated last month
• moonglow / kvaser_cantact
  Xvaser LL v2 firmware for CANtact ( CANable ) or any other similar boards.
  ☆46Updated 3 years ago
• nxyd / libudslin
  Unified Diagnostic Services (ISO-14229) protocol on LIN
  ☆22Updated 2 years ago
• jagumiel / LIN-Automotive
  Projects and utilities using the LIN Automotive Bus.
  ☆14Updated 3 years ago
• DanielMartensson / STM32-PLC
  STM32 microcontroller with lots of periferials such as ADC, differential ADC, Input Capture, PWM, USB, Encoder, DAC, Digital Input, RTC, …
  ☆129Updated last year
• devcoons / iso14229
  ☆21Updated 6 months ago
• ulrikhagstrom / datalinkengineeringcanopen
  CANopen SDK (API) for Windows developers. Supported adapters: Kvaser, Ixxat, CANUSB, CAN232, Peak PCAN, Copley Controls, USBTIN and more.
  ☆36Updated last year
• RudolphRiedel / USB_CAN-FD
  This is an Open Source Hardware USB to CAN-FD Interface
  ☆65Updated 3 months ago
• mach-systems / CANFD-LIN-Gateway
  An STM32CubeIDE project for the CAN-FD LIN Gateway device.
  ☆21Updated 2 years ago
• uCAN-LIN / LinUSBConverter
  LIN(Local interconnect network) to USB converter with LIN master support compatible with SLCAN.
  ☆78Updated 2 years ago
• karlyamashita / CANable_USB_CAN
  Open source project that uses the CANable hardware from protofusion.org
  ☆38Updated 5 years ago
• TheRo0T / CAN-USB-STM32
  ☆65Updated 9 years ago
• Infineon / lin
  The LIN middleware implements a LIN 2.2 and ISO 17987 compliance slave node.
  ☆12Updated 3 years ago
• madprogrammer / stm32-can-bootloader
  STM32 CAN-bus bootloader
  ☆76Updated 8 years ago
• lotusczp / Lobster
  Lobster is a PC tool designed mainly for measurement, calibration, debugging of embedded system.
  ☆21Updated 3 years ago
• sz-CHEN / ZCANBus
  A common interface for PeakCAN and KvaserCAN
  ☆14Updated 6 years ago
• davefiddes / c2000-inverter
  Port of the Hubner Inverter to the TI C2000 architecture used by Tesla inverters.
  ☆15Updated 2 years ago
• robincornelius / CanOpenMonitor
  A CanOpen Logging and injection tool
  ☆57Updated 6 months ago
• mac-can / SerialCAN
  Library for CAN-over-Serial-Line Interfaces (SLCAN Protocol)
  ☆44Updated 9 months ago
• cpperrr / sae-j1939
  ☆13Updated 5 years ago
• DanielMartensson / Easy-CANopen
  A CANopen protocol for all systems such as embedded, PC, etc.
  ☆109Updated last year
• moonglow / vector_can
  Vector VN1610 protocol implementation for cheap STM32F4 hardware
  ☆48Updated 2 years ago
• geier99 / STM32-CAN_CubeMX_Tests
  Demonstrate the use from STM32CubeMX for my STM32-CAN hardware
  ☆28Updated 8 years ago
• mikebailey61 / J1939_stack
  J1939 stack
  ☆53Updated 10 years ago
• RashadShubita / STM32F103_LIN-bus_Example
  ☆27Updated 6 years ago
• elliotwoods / Candle.NET
  .NET wrapper for the Candle API for candlelight CAN bus gateways/analysers (e.g. CANable, CANtact, etc)
  ☆26Updated 10 months ago
• normaldotcom / canblaster
  Utility to forward SocketCAN canbus traffic over UDP to Cangaroo and other applications
  ☆22Updated 2 years ago
• jgressmann / supercan
  This is project SuperCAN. An open source USB to CAN-FD protocol.
  ☆83Updated 2 months ago