Alternatives and similar repositories for sae-j1939

Users that are interested in sae-j1939 are comparing it to the libraries listed below

• Truck-OBD-Development / J1939_Decode
  ☆27Updated 9 years ago
• mikebailey61 / J1939_stack
  J1939 stack
  ☆53Updated 10 years ago
• TheRo0T / CAN-USB-STM32
  ☆67Updated 10 years ago
• MHS-Elektronik / J1939Display
  Open Source J1939 Data Viewer for the Raspberry Pi
  ☆25Updated 8 years ago
• GaoleiBai / lin_sniffer
  Lin bus sniffer
  ☆20Updated 9 years ago
• jackm / j1939decode
  J1939 decode C library
  ☆34Updated 4 years ago
• kurt-vd / test-can-j1939
  Readme + howto for can-j1939
  ☆42Updated 7 years ago
• madprogrammer / stm32-can-bootloader
  STM32 CAN-bus bootloader
  ☆79Updated 9 years ago
• moonglow / kvaser_cantact
  Xvaser LL v2 firmware for CANtact ( CANable ) or any other similar boards.
  ☆49Updated 3 years ago
• jsphuebner / libopeninv
  Generic modules that can be used in many projects
  ☆29Updated 2 months ago
• vladisenko / USB-CAN
  Yet another USB-CAN adapter.
  ☆15Updated 3 years ago
• roboterclubaachen / usb2can
  ☆51Updated 6 years ago
• mach-systems / CANFD-LIN-Gateway
  An STM32CubeIDE project for the CAN-FD LIN Gateway device.
  ☆25Updated 2 years ago
• RashadShubita / STM32F103_LIN-bus_Example
  ☆26Updated 6 years ago
• McNeight / arducross
  Arduino based CAN bus reader and logger for vehicle information important to autocross racers
  ☆14Updated 11 years ago
• jsphuebner / tumanako-inverter-fw-bootloader
  ☆10Updated 2 years ago
• nopnop2002 / esp-idf-can2usb
  CANbus to USB bridge using esp32
  ☆34Updated 3 weeks ago
• karlyamashita / CAN-X
  CAN bus analyzer software
  ☆31Updated last month
• uCAN-LIN / LinUSBConverter
  LIN(Local interconnect network) to USB converter with LIN master support compatible with SLCAN.
  ☆85Updated 3 years ago
• karlyamashita / CANable_USB_CAN
  Open source project that uses the CANable hardware from protofusion.org
  ☆44Updated 4 months ago
• devcoons / iso14229
  ☆23Updated last year
• LibreSolar / esp32-edge-firmware
  Firmware for CAN/UART to WiFi/BLE gateway using ESP32
  ☆28Updated 3 years ago
• mocona05 / CAN-BUS-TO-USB-UART-STM32F042-
  CAN-BUS TO USB-UART(STM32F042)
  ☆24Updated 9 years ago
• eziya / STM32_HAL_AWS_IOT
  AWS IOT prototype for STM32F4
  ☆13Updated 5 years ago
• DieBieEngineering / DieBieMS-Bootloader
  This is the bootloader firmware portion of my DieBieMS battery management system.
  ☆27Updated 6 years ago
• nopnop2002 / esp-idf-can2http
  CANbus to http bridge using esp32
  ☆45Updated 3 weeks ago
• waybyte / platform-logicrom
  Wireless IoT Development Platform for 4G LTE (RDA8910, ASR1601, ASR1603), GSM (MT2503, MT6261, RDA8955) & NBIoT (MT2625) Chipsets.
  ☆32Updated 10 months ago
• mxcd / CANnon
  A versatile CAN bootloader for the STM32 and friends
  ☆17Updated 8 years ago
• karlyamashita / common_libraries
  These are reusable libraries. You'll need to include the LSP.h file and remove comment for what you need.
  ☆31Updated 3 weeks ago
• nopnop2002 / esp-idf-can2mqtt
  CANbus to mqtt bridge using esp32
  ☆50Updated 3 weeks ago