ClayBuilds / Gumption-Trap-Links
This project is an autonomous solar powered boat which drives around following gps coordinates and plots the depth of water with sonar
☆74Updated last year
Alternatives and similar repositories for Gumption-Trap-
Users that are interested in Gumption-Trap- are comparing it to the libraries listed below
Sorting:
- Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.☆164Updated this week
- ☆40Updated 6 months ago
- With Field Oriented Control (FOC)☆49Updated 2 years ago
- Remote control library based on ESP-NOW (PlatformIO, ESP32 and ESP8266)☆92Updated 6 months ago
- Modified version of original dRehmFlight VTOL for the flying RC drift car☆32Updated 10 months ago
- Arduino LiDAR library supporting YDLIDAR X2/X3/X4, RPLIDAR A1, Xiaomi LDS02RR, Neato XV11, LD14P, CAMSENSE X1, Delta-2A/2B/2G☆133Updated 2 months ago
- Dual brushed motor ESC firmware compatible with brushless motor ESCs☆29Updated last year
- Arduino library to control brushed DC motors by PWM. Uses optional attached encoders to drive fixed distances.☆46Updated last week
- ☆74Updated last year
- A simple Arduino based logger for depth mapping of water bodies. Using cheap and simple hardware like GPS and a standard NMEA capable ech…☆55Updated 2 years ago
- ☆43Updated 7 months ago
- The goal of the project is to design a system with a size of a tube about 40cm long by 7cm in diameter, which can be released in free fal…☆63Updated 3 years ago
- Thermal imaging cameras based on the ESP32 and Lepton 3.5☆118Updated 11 months ago
- ☆59Updated 2 years ago
- Q8 Robot☆117Updated last week
- CAD files for a crazyflie drone test gimbal☆28Updated 11 months ago
- Speed controller and receiver for small robots☆41Updated 3 months ago
- Multi-sensor intelligent environmental Monitor☆17Updated last year
- ☆16Updated 3 years ago
- Arduino library for RC IBUS protocol - servo (receive) and sensors/telemetry (send) using hardware UART☆214Updated 10 months ago
- Arduino Infrared Camera☆38Updated last year
- This repository contains the code, 3D-printable files and electronics to make my 3D Lidar.☆74Updated last year
- An Arduino shield to test the TMC2209 stepper motion controller by Trinamic.☆36Updated 2 years ago
- ☆43Updated 6 months ago
- ESP32-S3 Thermal Sensor using an 8-bit bus☆82Updated last year
- Artwork for the MiniHawk VTOL, a 3D-Printed Tricopter/Fixed-wing hybrid aircraft.☆236Updated 2 years ago
- ☆22Updated 2 years ago
- ☆14Updated 7 months ago
- PCB hardware designs in KICAD for Acorn, the precision farming rover from Twisted Fields.☆71Updated 10 months ago
- The MUB - An ultra-compact, modular processing unit☆59Updated 2 years ago