Neumi / 3D_water_depth_logger
A simple Arduino based logger for depth mapping of water bodies. Using cheap and simple hardware like GPS and a standard NMEA capable echolot sounder.
☆52Updated 2 years ago
Alternatives and similar repositories for 3D_water_depth_logger:
Users that are interested in 3D_water_depth_logger are comparing it to the libraries listed below
- Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.☆139Updated 3 weeks ago
- Multi Channel Configurable PID regulator on M5Stack Core☆45Updated 7 months ago
- Arduino Library and Examples for BlHeli Passtrough with ESP32☆34Updated last year
- This project is an autonomous solar powered boat which drives around following gps coordinates and plots the depth of water with sonar☆73Updated last year
- This project demonstrates a full RTK solution with built in correction services.☆96Updated 3 months ago
- The goal of the project is to design a system with a size of a tube about 40cm long by 7cm in diameter, which can be released in free fal…☆62Updated 2 years ago
- Speed controller and receiver for small robots☆40Updated last month
- Dual brushed motor ESC firmware compatible with brushless motor ESCs☆28Updated 10 months ago
- Standalone Ultrasonic Anemometer based on a PIC32☆39Updated 7 years ago
- ☆37Updated 4 months ago
- It' the repository for the docs and schematics related to the ochin-CM4 Carrier Board☆91Updated 8 months ago
- controlling the eakins microscope camera via sockets☆54Updated last year
- ☆73Updated last year
- LoRa for Remote Control☆41Updated 6 years ago
- Using NRF24L01 as a virtual network device under Linux.☆79Updated 2 years ago
- Open Board Architecture for Linux☆60Updated 2 years ago
- Arduino classes for various UAV electronic IDs and ATM/UTM interfaces.☆81Updated last year
- A compact weather station.☆209Updated last year
- Cheap DIY RC link based on LoRa 868MHz modules☆118Updated 6 years ago
- ☆58Updated 2 years ago
- A guide on how to assemble a GNSS PPK RAWX Logger from an Adafruit Feather M0 Adalogger and a SparkFun GPS-RTK2 Board which incorporates …☆34Updated 5 years ago
- Sailor Hat for ESP32 hardware☆46Updated 5 months ago
- This repo contains open source hardware information for AnyLeaf ELRS receivers☆47Updated 2 years ago
- A High Caliber Ground Control Station System designed for the 21st century lifestyle☆49Updated 3 months ago
- GNSS Base Station based on Raspberry Pi 4B☆41Updated last year
- ☆20Updated last year
- Solder Reflow Plate PCB☆31Updated last year
- Upgrade for a LED tea light☆16Updated last year
- ☆41Updated 4 years ago
- ESP32 NTRIP Interface☆50Updated 2 months ago