BBUK / Bell-Boy
Code for the "Bell-Boy" Project
☆10Updated 5 years ago
Alternatives and similar repositories for Bell-Boy
Users that are interested in Bell-Boy are comparing it to the libraries listed below
Sorting:
- Arduino sketch for BNO080 9DOF with sensor fusion☆55Updated 3 years ago
- Demo code showing how to interface with BNO080 (or FSP200) using an STM32F411 Nucleo dev board.☆35Updated last year
- An Arduino Library for the BNO080 IMU combination triple axis accelerometer/gyro/magnetometer packaged with an ARM Cortex M0+ running pow…☆84Updated last year
- The BNO080/BNO085 IMU has a combination triple axis accelerometer/gyro/magnetometer packaged with an ARM Cortex M0+ running powerful algo…☆31Updated last year
- (Affordable) Ultimate Sensor Fusion Solution☆97Updated 6 years ago
- Cross-platform libraries for the EM7180 Ultimate Sensor Fusion Solution☆30Updated 8 months ago
- Library for accessing the Bosch BNO055 absolute orientation sensor on a Raspberry Pi or Beaglebone Black.☆59Updated 6 years ago
- Invensense 20948 chip working with DMP code for Arduino environment☆42Updated 5 years ago
- ☆24Updated 6 years ago
- Arduino program for building an AHRS with a Pololu MinIMU-9☆139Updated 4 years ago
- Embedded firmware and web user interface for self balancing telepresence robot☆31Updated 7 years ago
- Bosch Sensortec BNO055 sensor driver. To report issues, go to https://community.bosch-sensortec.com/t5/Bosch-Sensortec-Community/ct-p/bst…☆229Updated 2 years ago
- Arduino driver for PMW3901 optical flow sensor☆62Updated 2 years ago
- ☆83Updated 2 years ago
- Commandline program for reading a Hillcrest Labs Bosch BNO080 IMU sensor over I2C under Linux☆17Updated 5 years ago
- Example code for the ADNS-3080 optical flow sensor☆53Updated 2 years ago
- Orientation estimation algorithms based on IMUs and MARG sensors☆52Updated 8 years ago
- ST's new smaller, lower-power 9-axis motion sensor☆41Updated 4 years ago
- Teensiduino sketch for 9-axis BNO055 motion sensor + MS5637 pressure sensor☆56Updated 9 years ago
- DPEng's Arduino library for the ICM-20948 breakout board with magnetometer calibration and AHRS examples☆27Updated 3 years ago
- This is the Arduino version of the code for my balancing robot/segway☆75Updated 12 years ago
- Arduino library for BNO08x☆52Updated last year
- MPU-9250 SPI Library for Arduino/Teensy☆64Updated 8 years ago
- ICM-20948 port of the MPU-9250 Kris Winer Arduino library☆37Updated 3 years ago
- 9DOF Razor IMU available from SparkFun Electronics☆115Updated 5 years ago
- Driver for the Adafruit FSOX8700 Accelerometer/Magnetometer Breakout☆13Updated last year
- ☆50Updated 8 years ago
- RTIMULib makes it easy to use 9-dof IMUs with embedded Linux systems (especially the Raspberry PI!)☆48Updated 4 years ago
- Python library for the Pimoroni ICM20948 breakout☆51Updated 10 months ago
- SH2 interface library for Hillcrest Laboratories, Inc BNO08x and FSP200 products.☆49Updated last year