Alternatives and similar repositories for MKS-DLP-alter:

Users that are interested in MKS-DLP-alter are comparing it to the libraries listed below

• nickshl / SmartPendant
  SmartPendant - a way to control grblHAL based CNC machine without PC
  ☆42Updated this week
• scottalford75 / Remora
  Remora is a free, opensource LinuxCNC component and Programmable Realtime Unit (PRU) firmware to allow LPC176x and STM32F4 micro-controll…
  ☆146Updated 2 months ago
• pscrespo / Morpheus-STM32
  A small 3D printer controller board for use with a "blue pill" STM32F1 generic board. Inspired on http://reprap.org/wiki/SinapTec
  ☆73Updated 4 years ago
• kondor3d / kondor
  firmware for LCD based 3D printers
  ☆25Updated 3 years ago
• Alfrederson / cncstm32
  CNC Base for Blue Pill
  ☆16Updated 6 years ago
• IvDm / Z-probe-on-smd-resistors-2512
  Auto bed level strain gage for 3D printer using resistors 2512 instead of strain gauges.
  ☆137Updated 4 years ago
• Skiff2 / SimplyVFD_V3
  Частотник версии 5-8Квт
  ☆36Updated last month
• Aus3D / RUMBA32
  A powerful 32-bit 3D printer control board.
  ☆71Updated 4 years ago
• positron96 / ESP32_CNC_Pendant
  A CNC Pendant on ESP32 board, with LCD, WiFi and SD card
  ☆75Updated 10 months ago
• scottalford75 / LinuxCNC-3D-Printing
  ☆25Updated last year
• makerbase-mks / MKS-SERVO42B
  MKS SERVO42B is 3d printer closed loop stepper motor NEMA17 MKS SERVO42 developed by Makerbase that prevents losing steps. CPU is STM32F1…
  ☆172Updated 3 years ago
• Expatria-Technologies / PicoBOB
  Low-cost and simple GRBLHAL to MACH3 BOB bridge for Raspberry Pi Pico
  ☆27Updated 3 weeks ago
• bigtreetech / BIGTREETECH-S42B-V1.0
  The closed-loop drive is to feedback the rotation angle of the stepping motor to the control panel, compare the distance that needs to be…
  ☆113Updated 3 years ago
• scottalford75 / Remora-NVEM
  Remora firmware for Novusun NVEM controller board
  ☆14Updated 4 months ago
• robotsrulz / MKS-TFT
  MKS TFT32/28 alternative firmware
  ☆68Updated 7 years ago
• mgineer85 / 0816-feeder-firmware
  Firmware for the 0816 automatic 3d printed smt feeder for OpenPnP.
  ☆34Updated 2 years ago
• grblHAL / iMXRT1062
  grblHAL driver for NXP iMXRT1062 (Teensy 4.x)
  ☆52Updated this week
• hackaday3D / marlin_stm32
  stm32 for marlin 1.1.9
  ☆53Updated 5 years ago
• simon-jouet / ESP32Controller
  ESP32-based 3D printer controller
  ☆123Updated 3 years ago
• makerbase-mks / MKS-DLP
  MKS DLP is a powerful photocuring 3D Printer Controller Board With MKS Robin TFT35 Display, 2K Sharp screen. Open source hardware schemat…
  ☆33Updated 4 years ago
• makerbase-mks / MKS-SERVO57B
  MKS SERVO57B is 3d printer closed loop stepper motor NEMA23 MKS SERVO57 developed by Makerbase that prevents losing steps. CPU is STM32F1…
  ☆21Updated 3 years ago
• Devtronic-US / SmartPendant
  ☆22Updated 2 months ago
• positron96 / cnc3018-offline-controller
  Open-source firmware for popular cnc3018 stm32-based offline controller
  ☆72Updated 4 months ago
• zapta / simple_stepper_motor_analyzer
  A DYI stepper motor analyzer. This is a new design that is based on Raspberry Pi Pico and users a compact single PCB design. NOTE: The l…
  ☆151Updated last year
• phil-barrett / grblHAL-teensy-4.x
  GRBL Header for a Teensy 4
  ☆113Updated last year
• CAP1Sup / Intellistep
  A rework of the terribly coded firmware from the BTT S42B v2 boards
  ☆45Updated 4 months ago
• paulusjacobus / SuperGerbil
  STM32 driven ARM Grbl firmware
  ☆23Updated 5 years ago
• grblHAL / STM32F1xx
  grblHAL driver for ST STM32F1xx (Redpill, Bluepill)
  ☆50Updated last week
• robomechs / 6-AXIS-USBCNC-GRBL
  This repository is based on https://github.com/usbcnc/grbl which in turn is based on https://github.com/gnea/grbl
  ☆206Updated 4 years ago
• ChrisWag91 / rpi_level_shifter_hat
  Raspberry Pi Hat for bidirectional 3V3 to 5V Level Shifting
  ☆29Updated 4 years ago