981213 / ch347-nor-progLinks
Simple CH347 SPI-NOR programmer
☆16Updated last year
Alternatives and similar repositories for ch347-nor-prog
Users that are interested in ch347-nor-prog are comparing it to the libraries listed below
Sorting:
- openocd ch341a port☆13Updated 2 years ago
- A SPI-NAND flash programmer botched together using kernel SPI-NAND framework. Works with stm32-vserprog or WCH CH347.☆51Updated last year
- Winnermicro W60x Wi-Fi library reverse engineering notes & hackings☆18Updated 4 years ago
- Opensource embedded controller firmware for sipeed boards.☆39Updated 6 years ago
- USB-Blaster instance on CH55x MCU.☆49Updated 6 years ago
- a cheap CMSIS-DAP debugger by an WCH chip named CH549F☆46Updated 4 years ago
- CH347 - I2C, SPI, UART e JTAG - Softwares (Windows, Linux, Mac and Android)☆40Updated 2 months ago
- Dreg's fork flashrom special edition for Buzzpirat & bus pirate. Windows x64 & x32 raiden_debug_spi, ft2232_spi, serprog, buspirate_spi, …☆38Updated 11 months ago
- ICN6211 Configurator☆39Updated 4 years ago
- Read-only mirror of the official repo at git://sigrok.org/sigrok-firmware-fx2lafw. Pull requests welcome. Please file bugreports at sigro…☆50Updated last year
- ☆87Updated 2 months ago
- AIR32F103 template project for GNU Arm Embedded Toolchain☆33Updated last year
- ☆36Updated last year
- USB-JTAG Adapter Using CH552☆69Updated 3 years ago
- USB2Sniffer: High Speed USB 2.0 capture (for LambdaConcept USB2Sniffer hardware)☆55Updated 5 years ago
- Via Labs 805/806☆34Updated 2 years ago
- WCH-LinkW is a wired/wireless 2.4G dual imitation real debugger, which can be used for online debugging and downloading of WCH RISC-V a…☆20Updated last year
- L4：Cortex A5 GSM SoC RDA8810☆25Updated 6 years ago
- Please consider the new stm32-vserprog (https://github.com/dword1511/stm32-vserprog) project which uses libopencm3 and compiles with stan…☆67Updated 9 years ago
- Single-chip solution for Hi-speed USB2.0(480Mbps) JTAG/SPI Debugger based on RISC-V MCU CH32V30x/CH32V20x☆112Updated 2 years ago
- A Python Library provides full access of SPI/I2C/UART settings and communication with CH347 USB-SPI/I2C/UART bridge chip in Python langua…☆48Updated 9 months ago
- An Open-Source CMSIS-DAP Debug Probe based on DAPLink and USB bus convert and it can realize USB convert to serial interface based in CH5…☆95Updated 11 months ago
- USB to dual UART / SPI / I2C / JTAG / FIFO / Bit-Bang...☆137Updated 2 years ago
- OpenOCD source code for CH32V series MCUs released by Mounriver IDE☆55Updated 3 years ago
- Deprecated, use 'wlink' instead. Command line tool to switch WCH-LinkE modes between DAP and RV from host.☆10Updated 7 months ago
- JTAG Versaloon firmware for the STM32 Bluepill board☆140Updated 3 years ago
- Its a cheap "single board computer". Closest analogue Lichee PI.☆31Updated 4 years ago
- CMSIS-DAP compliant debugging probe with SWD, JTAG, and VCP support☆34Updated last month
- Universal JTAG/SWD/UART adapter based on FT2232H☆30Updated 3 years ago
- HydraUSB3 (WCH CH569) open source test firmware / examples / libraries to experiment with streaming / high-speed protocols (USB2 HS, USB3…☆81Updated 2 years ago