Alternatives and similar repositories for Firmware

Users that are interested in Firmware are comparing it to the libraries listed below

• femtoduino / femto-beacon
  FemtoBeacon - Atmel SAM R21 (ARM Cortex M0+, SAM D21 with built in AT86RF233)
  ☆66Updated 5 years ago
• Spritetm / hadbadge2019_pcb
  PCB artwork for the Hackaday Supercon 2019 badge
  ☆58Updated 6 years ago
• stevenj / GenPinoutSVG
  Generate Pinout Datasheet in SVG format, from a CSV source file of pin defintions
  ☆70Updated 3 years ago
• arturo182 / tinyuf2
  An open source cross-platform UF2 bootloader based on the TinyUSB library
  ☆27Updated 5 years ago
• gregdavill / obsidian-boa
  Compact ESP32-S2 development board.
  ☆103Updated 4 years ago
• smdprutser / SWM050
  ☆19Updated 7 years ago
• femtoduino / femu-hardware
  Femto ESP32 Micro USB
  ☆33Updated 4 years ago
• gregdavill / gpsLoggerLora
  ☆21Updated 6 years ago
• maholli / SAM32
  Feather-sized SAMD51 with M4 core serving as UART bridge to WROOM ESP32
  ☆42Updated 4 years ago
• Jana-Marie / USB-PD-Firmware
  USB-PD firmware for the stm32f072 - forked from https://git.clayhobbs.com/pd-buddy/pd-buddy-firmware
  ☆31Updated 6 years ago
• 1Bitsy / 1bitsy-examples
  Example projects for the 1BitSy development boards.
  ☆37Updated last year
• har-in-air / ESP32-LCD-I2S
  Espressif ESP32 driving a controller-less monochrome lcd with parallel I2S bus
  ☆67Updated 5 years ago
• kaktus85 / MightyWattR3
  Resources for MightyWatt R3 electronic load
  ☆31Updated 3 months ago
• sparkfunX / Buzzard
  Software tools for EAGLE silkscreen generation
  ☆100Updated 3 years ago
• OLIMEX / ESP32-PRO
  ESP32 IoT board with 4MB external RAM, 4MB external Flash, LiPo charger, external crypto engine USB-OTG
  ☆51Updated last year
• arturo182 / serpente_hw
  ☆35Updated 5 years ago
• bertrik / ElectronicLoad
  Arduino software for an electronically controlled load, based on a STM32 microcontroller
  ☆21Updated 4 years ago
• fugalster / Smart-BLDC-Commutator-Hardware
  ☆17Updated 11 years ago
• mike-rankin / ESP32_Burninator
  An ESP32 project using two linear stepper motors and a burning laser diode
  ☆60Updated 4 years ago
• trueserve / reflowOvenController
  Reflow Oven Controller. true_oven devel branch progress: vertical LCD, 60Hz mains, faster LCD, bug fixes, works with Arduino Nano / Mini …
  ☆15Updated 10 years ago
• cinderblock / 3-Phase-Controller
  Firmware for 3 Phase BLDC controller
  ☆41Updated 5 years ago
• mike-rankin / ESP32_CoinCell_Color_TFT
  Based off of the CoinCell Board but with more sensors and a 80x160 ST7735 color tft lcd
  ☆58Updated 4 years ago
• electronut / ElectronutLabs-Bumpy
  An inexpensive Open Source blackmagic probe compatible SWD debugger designed to be used with ARM GDB.
  ☆35Updated 6 years ago
• andysworkshop / awcopper
  Andy's Workshtop Graphics Coprocessor
  ☆13Updated 10 years ago
• s54mtb / lora_breakout
  Breakout board for LoRa all-in-one module CMWX1ZZABZ
  ☆13Updated 5 years ago
• adafruit / M.2
  Discussion, files, spec, and more for a M.2 standard for makers
  ☆34Updated 5 years ago
• probe-scope / probe-scope-fpga
  FPGA Software for the Probe-Scope
  ☆19Updated 6 years ago
• probe-scope / Probe-Scope-PCB
  Main Probe Scope PCB Repo
  ☆57Updated 6 years ago
• ReclaimerLabs / USB-C-Explorer
  Dev board for USB-C and Power Delivery
  ☆147Updated 5 years ago
• Hack-a-Day / basic-badge
  2018 Hackaday Belgrade Hardware Badge
  ☆37Updated 6 years ago