zhujisheng / KNX-IP-Router-DIYLinks
How to DIY a KNX IP Router
☆25Updated 3 years ago
Alternatives and similar repositories for KNX-IP-Router-DIY
Users that are interested in KNX-IP-Router-DIY are comparing it to the libraries listed below
Sorting:
- Simple Gui to create simple knxprod file for ETS.☆60Updated 3 years ago
- A KNX/IP library for the ESP8266 with Arduino☆144Updated 3 years ago
- Alternative Firmware for 'ESP8266, ESP8285 and ESP32 based devices' like Itead Sonoff, Shelly or NodeMCU, with Web, Timers, OTA, MQTT, KN…☆47Updated last year
- Create your own KnxProd Files with UI.☆90Updated 3 weeks ago
- An arduino library that implements the CC.Debugger protocol of TI☆27Updated 5 years ago
- An interface for the Eastron SDM/Modbus smart meter series.☆73Updated 6 years ago
- KNXnet/IP server for KNX IP, KNX (RF) USB, FT1.2, and TP-UART☆68Updated last week
- PlatformIO: implements a knx-sensor firmware for a SAMD21 board☆11Updated 3 years ago
- WiFi to BLE gateway on ESP32☆83Updated 4 years ago
- Use KNX just like the mqtt nodes☆20Updated 6 years ago
- Single relay with ds18b20 sensor for TI cc2530 and Sonoff Zigbee☆64Updated last year
- A Modbus RTU (RS-485) to MQTT Gateway (based on ESP32)☆93Updated last year
- Collection of reusable componets for Z-stack 3.0.2☆25Updated 3 years ago
- ESP8266/32 (HA Switch) ⯈ PCF8574 ⯈ 8-Relay☆53Updated 4 years ago
- Linknx is a service aimed at interacting with KNX devices. It features a value cache to save bus bandwidth and exposes a rules engine all…☆50Updated 2 months ago
- demonstrates how to read bytes from stknx chip☆20Updated 5 years ago
- A BLE to MQTT bridge☆61Updated 6 years ago
- ☆25Updated last month
- KNX sniffer aka KNX BUS Monitor☆16Updated last year
- Arduino Zigbee Gateway based on ESP32 and JN5169☆40Updated 4 years ago
- ☆69Updated 6 years ago
- Full-featured Serial bridge for ESP8266, supports MQTT, WebSockets,Telnet, and also comes with a nice Config Page☆39Updated 2 years ago
- Zigbee light switch with dim support base on chip cc2530☆93Updated 5 years ago
- EZSP Firmware☆25Updated 3 years ago
- Alternative firmware for Aqara opple switches☆31Updated 4 years ago
- DALI Master Particle library for use with LED-Warrior-14☆19Updated 2 years ago
- Modbus TCP <-> MQTT glue. YAML configuration. Robust.☆87Updated last year
- ☆21Updated 5 years ago
- Burn HM-10 (CC2541) and Zigbee (CC2530 CC2531) firmware using NodeMCU board.☆44Updated 4 years ago
- DALI <-> MQTT bridge☆49Updated last year