Alternatives and similar repositories for OpenKNX

Users that are interested in OpenKNX are comparing it to the libraries listed below

• laurent-martin / ets-to-homeassistant
  script to convert ETS5 project file to a YAML configuration file suitable for Home Assistant
  ☆61Updated 11 months ago
• openv / vcontrold
  vcontrold Daemon for control and logging of Viessmann® type heating devices
  ☆120Updated last year
• XKNX / xknxproject
  ETS project parser written in python
  ☆104Updated last week
• thorsten-gehrig / KnxTpUart
  This is the library of the KNX-User-Forum Arduino project initiated by thorsten Gehrig
  ☆58Updated 7 months ago
• wmbusmeters / wmbusmeters-ha-addon
  The official ha-addon repository for wmbusmeters.
  ☆101Updated last week
• alengwenus / esphome_components
  External components for ESPHome
  ☆29Updated 2 years ago
• Supergiovane / node-red-contrib-knx-ultimate
  Control your KNX intallation via Node-Red! A bunch of KNX nodes, with integrated Philips HUE control and ETS group address importer.
  ☆166Updated last week
• codm / cc2652p2-tcp-zigbee
  ZigBee CC2652P2 Ethernet Coordinator
  ☆33Updated 2 months ago
• thelsing / knx
  knx stack (TP, IP and RF) for arduino and linux, Can be configured with ETS
  ☆329Updated 2 months ago
• hkiam / HCPBridge
  emulates Hoermann HAP 1 HCP (HCP2) on ESP8622, ESP32 and Arduino.
  ☆99Updated 4 years ago
• XKNX / knx-frontend
  Home Assistant Panel for managing the KNX integration
  ☆63Updated last week
• embyt / enocean-mqtt
  Receives messages from an enOcean serial interface (USB) and provides selected messages to an MQTT broker.
  ☆46Updated 11 months ago
• stephan192 / hoermann_door
  Control Hörmann doors directly via MQTT
  ☆126Updated 4 months ago
• nliaudat / esp32_8ch_motor_shield
  An ESP32 based 8 channels motor controller (to replace Homematic IP Floor Heating Actuator)
  ☆111Updated 5 months ago
• DomiStyle / esphome-dlms-meter
  ESPHome component to read out DLMS smart meters via M-Bus
  ☆119Updated last year
• mruettgers / SMLReader
  ESP8266 based smart meter (SML) to MQTT gateway
  ☆320Updated 2 years ago
• bertmelis / VitoWiFi
  Communicate with Viessmann boilers using the optolink for ESP8266 and ESP32
  ☆137Updated 3 weeks ago
• thewhobox / Kaenx
  Inbetriebnahmesoftware für KNX Geräte
  ☆25Updated 2 years ago
• Akulatraxas / ha-modbusproxy
  Hassio Addon packaging modus-proxy
  ☆64Updated 2 years ago
• pakerfeldt / knx-mqtt-bridge
  ☆40Updated last month
• volkszaehler / mbmd
  ModBus Measurement Daemon - simple reading of data from ModBus meters and grid inverters
  ☆274Updated this week
• wichers / esphome-comfoair
  ESPHome configuration to drive Zehnder ComfoAir devices.
  ☆73Updated last week
• john30 / ebusd-esp
  Firmware for ESP8266 allowing eBUS communication for ebusd (https://github.com/john30/ebusd)
  ☆157Updated last year
• atlewee / node-red-contrib-knx-easy
  Use KNX just like the mqtt nodes
  ☆20Updated 6 years ago
• MSkjel / LocalPulse2Tibber
  ☆95Updated 2 years ago
• patience4711 / read-APSystems-YC600-QS1-DS3
  Software for an esp8266 nodemcu to read data from APS inverters.
  ☆143Updated 4 months ago
• tillsteinbach / WeConnect-mqtt
  MQTT Client that publishes data from Volkswagen WeConnect
  ☆79Updated last month
• steff393 / hgdo
  Hörmann Garage Door Opener mit ESP8266 (direkt über Bus, ohne UAP1 !)
  ☆44Updated 3 years ago
• MatterVN / ModbusTCP2MQTT
  Sungrow & SMA Solar Inverter addon for Home Assistant using mobusTCP
  ☆78Updated last year
• CJNE / ha-sunspec
  Home Assistant customcomponent for SunSpec modbus devices
  ☆80Updated last month