zarpli / PS-WTX500
Digital Audio Processor Pulsus PS9829B
☆13Updated 2 years ago
Alternatives and similar repositories for PS-WTX500:
Users that are interested in PS-WTX500 are comparing it to the libraries listed below
- Simple design for 16x2 OLED Character Display using the US2066 chip☆11Updated last year
- Minimalist 4-channel 0 to 27V meter using AVR microcontroller and 72x40 OLED display☆19Updated 10 months ago
- ☆14Updated 4 years ago
- Serial port emulation over CAN bus☆28Updated 2 years ago
- 12-Button IR Remote Control☆44Updated 2 years ago
- A 4-digit 7-segment digital clock, based on the inexpensive Padauk microcontrollers☆13Updated 2 years ago
- A simple standalone continuity tester, based on the ultra-inexpensive Padauk microcontrollers and a piezo buzzer.☆12Updated 2 years ago
- Use the ch32v003 as a usb pd controller☆38Updated 8 months ago
- CH551 to CH554 One Click SDCC Compiler☆22Updated 3 years ago
- esp8266 controller based on SVG with embedded links☆10Updated 3 years ago
- I2C hardware test terminal/master mode emulator.☆20Updated 4 years ago
- Display Parallel Interface HAT (Hardware Attached on Top) for Raspberry Pi☆18Updated 4 years ago
- I/O Testing or PC program <=> Arduino communication☆31Updated 4 years ago
- Quick and dirty PIC16F72 programmer using the Raspberry Pi Pico and MicroPython☆32Updated last year
- Open source WiFi development board for a portable fume extractor with 5V USB-powered fan for absorbing smoke.☆13Updated 5 years ago
- Information, snippets of code, and suchlike, for the Rigol DS1000Z series of oscilloscopes.☆14Updated 7 years ago
- Simplified design of an analog keypad matrix interface and demo thereof☆16Updated 3 years ago
- ☆16Updated last year
- Audio out with an FTDI UART cable☆43Updated 4 years ago
- A version of the easy pdk programmer that can be fully assembled using the JLCPCB assembly service.☆9Updated 4 years ago
- Open Source Reflow Oven Controller.☆19Updated 3 years ago
- A Serial-To-Parallel data transmission device, built with the ATMEGA328.☆12Updated 6 years ago
- Hardware of Jasper's Electronic Load R2☆21Updated 6 years ago
- A simple continuity tester, based on an ATtiny85 and a piezo buzzer.☆18Updated 7 years ago
- ☆11Updated 2 years ago
- Open Hardware gaming pads for breadboard.☆10Updated 3 years ago
- Custom Firmware for SD-RGB500 Laser Projector☆34Updated 2 years ago
- ☆35Updated last year
- Playing around with the Padauk MCUs☆33Updated 4 years ago
- Making a complete KiCad Project from the Hackaday Supercon 2023 Vectorscope Badge☆17Updated last year