Alternatives and similar repositories for ZapCapture:

Users that are interested in ZapCapture are comparing it to the libraries listed below

• ricardodeazambuja / RPI0_GPU_FFT
  Experiments using the RPI Zero GPU for FFT (1D and 2D)
  ☆33Updated 3 years ago
• zarpli / PS-WTX500
  Digital Audio Processor Pulsus PS9829B
  ☆12Updated 2 years ago
• JeremySCook / clock742
  Clock 742 is a clock made with a PCB diffuser
  ☆16Updated 2 years ago
• nickbild / schematic-o-matic
  Automatically draw a KiCad schematic for a circuit prototyped on a breadboard.
  ☆25Updated 3 years ago
• Hack-a-Day / Remoticon_KiCad_Blender
  support files for the 2020 Remoticon KiCad to Blender > PCB renders workshop
  ☆22Updated 4 years ago
• cnlohr / oledscope
  Playing around with a 128x128 OLED module
  ☆27Updated 2 months ago
• joeycastillo / Feather-Projects
  ☆13Updated 2 years ago
• jaydcarlson / padauk-experiments
  Playing around with the Padauk MCUs
  ☆31Updated 4 years ago
• grughuhler / grug_lo_gen
  ☆15Updated 10 months ago
• wagiminator / ATtiny412-VoiceChanger
  Change the Pitch of your Voice
  ☆20Updated 2 years ago
• LaboratoireMecaniqueLille / Seek-thermal-Python
  Python wrapper to use Seek thermal IR cameras
  ☆17Updated 6 years ago
• panovvv / solar-harvester
  DIY outdoor solar harvester.
  ☆21Updated 4 years ago
• adafruit / Adafruit_seesawPeripheral
  Arduino library for making seesaw peripherals using Arduino core!
  ☆25Updated 3 months ago
• sgmne / AnalogKeypad
  Simplified design of an analog keypad matrix interface and demo thereof
  ☆16Updated 3 years ago
• Thor-x86 / arduino_cli
  I/O Testing or PC program <=> Arduino communication
  ☆31Updated 3 years ago
• fullyautomated / ferret
  Fully Automated line of USB-C PD PPS boards
  ☆18Updated 4 years ago
• bytesizedengineering / mppt-charge-controller
  ☆10Updated 5 months ago
• lynaghk / calipertron
  ☆20Updated 2 months ago
• BigCorvus / SMA-Q2-Firmware-3
  3rd take on the ultimate open source smartwatch project
  ☆13Updated 5 years ago
• makersmakingchange / Rocket-Switch-Interface
  A cost-effective two input switch interface based on a commercially available Trinkey board.
  ☆19Updated 10 months ago
• daveake / S7xG
  HAB Firmware for the S7xG board in the LilyGo Watch, to provide basic GPS and LoRa for UKHAS telemetry
  ☆20Updated 4 years ago
• limpkin / xt60_parallelizer
  a custom board to monitor custom battery packs
  ☆16Updated 7 months ago
• CurlyTaleGamesLLC / PCBWrench
  Open Hardware Wrench made from PCBs
  ☆16Updated 3 years ago
• im-pro-at / Etch-a-Selfie
  ESP32_CAM meets Etch-A-Sketch => Etch-a-Selfie
  ☆12Updated 5 years ago
• SyedTahmidMahbub / q-dpico_picprog72
  Quick and dirty PIC16F72 programmer using the Raspberry Pi Pico and MicroPython
  ☆32Updated last year
• Inne-Lemstra / soft_soldering_jig
  Circuit sculpture jig consisting of a vacuum pump attached to a silicone pad to keep rods and SMD components in place when soldering them…
  ☆19Updated 4 years ago
• klui-freiberg / PowerEver
  Simply turn your power bank into a cool power supply
  ☆12Updated 4 years ago
• OLIMEX / Ultra-Sound-Levitation
  Ultra Sound Levitation board with two speakers and potentiometer
  ☆20Updated 2 years ago
• upiir / 1602_oled_character_display
  Simple design for 16x2 OLED Character Display using the US2066 chip
  ☆11Updated last year
• mike-rankin / ESP32_Burninator
  An ESP32 project using two linear stepper motors and a burning laser diode
  ☆58Updated 3 years ago